Technical information

7474
References
Modicon STB distributed I/O
solution
Parallel interface module STBEPI2145K
TeSys U and TeSys Quickt applications
STBEPI2145K
References
The STBEPI2145K parallel interface module is supplied with the appropriate mounting base for the module.
Module for TeSys U and TeSys Quickt starter-controllers
Power supply type Voltage Reference Weight
kg
c
24 V STBEPI2145K 0.165
Mandatory separate parts
Description Use No.
(1)
Length Reference Weight
kg
Connecting cables
An RJ45 connector
at each end
For connecting the STBEPI2145K module
to the TeSys U (2).and TeSys Quickt (3).
starter-controller.
1
0.3 m LU9R03 0.0450
1 m LU9R10 0.065
2 m 490NTW00002 –
3 m LU9R30 0.125
5 m 490NTW00005 –
12 m 490NTW00012 –
Optional parts
Description Use Sold in
lots of
Reference Weight
kg
Keying pin For application-specic module 60 STBXMP7700 –
Sheets of labels
for customization
(4)
Bases and I/O modules 25 STBXMP6700 –
Spare parts
Description Use Reference Weight
kg
Base
size 3, 28.1 mm
Mounting application-specic module on
DIN rail
STBXBA3000 0.048
(1).For.key.to.numbers,.see.page.75
(2).TeSys.U.forward.only.and.forward/reverse.require.only.1.cable
(3).TeSys.Quickt.forward.only.requires.1.cable,TeSys.Quickt.forward/reverse.requires.2.cables
(4).Sheets.of.144.labels.The.template.sheet.for.the.customization.labels.is.supplied.with.the.documentation.mini-CD-ROM