Technical information
62
More technical information on www.schneider-electric.com
62
Selection.guide.(continued)
Applications Analog output modules Analog output modules
Voltage Current
Number of channels 2 1 2
Range 0...10 V - 10…+ 10 V 0...+ 10 V (default)
- 10...+ 10 V
1...5 V
0...5 V
0...10 V
-5...+5 V
-10...+10 V (default)
4...20 mA 0...20 mA 4...20 mA
Resolution 10 bits 9 bits + sign 11 bits + sign or 12 bits 15 bits + sign 15 bits + sign 10 bits 12 bits 15 bits + sign
Isolation Channel-to-channel 30 V (when actuator voltage is separate from logic bus voltage) 200 V – 30 V (when actuator voltage is separate from logic bus
voltage)
200 V
Output current per channel 5 mA 150 mA 4...20 mA
Response time 3 ms for both channels 4 ms 12 ms 3 ms for both channels 4 ms for both channels 0.4 mA/ms plus acquisition
time per channel
Acquisition period – Adjustable up to
255 ms
– –
Acquisition or update time 25 ms for both channels 8 ms 8 ms 25 ms for both channels 8 ms
Internal power supply for 3-wire actuators Yes – Yes No
Connection (connectors supplied with modules) 2 x STBXTS1100 screw-type or STBXTS2100 spring-type 6-way connectors 1 x STBXTS1100 screw-type
or STBXTS2100 spring-type
6-way connector
2 x STBXTS1100 screw-type or STBXTS2100 spring-type 6-way connectors
Base (supplied with modules) STBXBA1000, size 1 (13.9 mm) STBXBA2000,
size 2 (18.4 mm)
STBXBA2000, size 2 (18.4 mm) STBXBA1000, size 1 (13.9 mm) STBXBA2000, size 2 (18.4 mm)
Power distribution modules
(PDM) (1)
Voltage 24 V 24 V
Reference STBPDT3100 K/3105 K STBPDT3100K/3105K
Fallback states Default 0 V on both channels 4 mA 4 mA on both channels 0 mA on both channels
User-congurable (1) – Yes.(2) Yes.(2) – Yes.(2) Yes.(3)
Protection Reverse polarity Yes – Yes
Short-circuit and overload 2.5 A time-lag fuses recommended on each channel. To be supplied by the user Yes, by time-lag fuse on the Power Distribution Module (PDM)
Electronic protection of
sensor power supply
No Yes – No
Absolute accuracy at 25°C +/-0,5% of full scale +/-0,3% of full scale +/-0,3% of full scale +/-0,5% of full scale +/-0,3% of full scale
Hot swapping supported Yes, with standard NIM only Yes, with standard NIM only
Reex actions supported (1) No Yes, 2 max. Yes Yes No Yes, 2 max. Yes
Operating temperature, horizontal mounting (4) 0…60°C (5) -25…70°C (6) -25…70°C (6) 0…60°C (5) -25…70°C
Current consumption on 5 V c logic bus 45 mA 265 mA 155 mA 40 mA 210 mA
Module type Standard
STBAVO1250K STBAVO0200K STBACO0120K STBACO1210K STBACO0220K STBACO8220K
Basic
STBAVO1255K STBAVO1265K STBACO1225K
Page 66 66
(1).One.Power.Distribution.Module.(PDM).is.required.per.voltage.group
(2).Hold.last.value:.reset.to.zero.on.both.channels;.go.to.a.predened.value.(between.0.V.andfull.scale).on.each.channel
(3).Each.channel.individually.adjustable:.hold.last.value,.go.to.a.predened.value.between.0.and.100%.of.the.output.range
(4).Vertical.mounting:.apply.derating.of.8°C.to.the.operating.temperatures.for.horizontal.mounting
(5).For.standard.operating.temperatures.range,.the.power.consumption.can.be.calculated.using.Advantys.or.Unity.Pro.software,.or.a.handwritten.sheet.available.at.
the.end.of.this.catalog.(see.page.114).or.an.Excel.worksheet.available.on.our.website,.wwwschneider-electriccom
(6).For.extended.operating.temperatures.range,.the.power.consumption.can.be.only.calculated.using.Advantys.or.Unity.Pro.software
Modicon STB distributed I/O
solution
Analog I/O modules
Voltage and current outputs