Technical information

5454
Functions.
STB digital output module operating modes
Output protection and reset following overload or short-circuit
Modicon STB digital output module Short-circuit and thermal
overload protection
Actuator power supply
protection
Reset Diagnostics
Basic modules, STBDDO3415K, 3605K, 3705pp Internal electronic Via PDM fuse On elimination
of the fault
Per group of
2 channels
Standard modules, STBDDO3200K, 3230K
Actuator powered by the module
Internal electronic Internal electronic Congurable (1) Per channel
Standard modules, STBDDO3200K, 3230K
Actuator powered externally
Internal electronic Via external fuse Congurable (1) Per channel
Standard modules, STBDDO3410K, 3600K Internal electronic – – Per group of
2 channels
Standard modules, STBDRC3210K, STBDRA3290K External fuse – Congurable (1) –
Standard modules, STBDAO8210K External fuse Via external fuse Congurable (1) –
Standard modules, STBDAO5260K External fuse – Congurable (1) –
Behaviour of digital output modules upon internal communication fault on the island or between PLC and NIM
Modicon STB digital output module Output fallback
Basic modules, STBDDO3415K, 3605K, 3705pp 0 (open output)
Standard modules, STBDDO3200K, 3230K, 3410K, 3600K
STBDRC3210K, STBDRA3290K
STBDAO8210K, STBDAO5260K
Congurable (2)
Hot swapping and cold swapping of output modules
Swapping a module While energized: Hot swap Cold swap
Standard NIM Any type of NIM
Basic digital output module The other I/O modules remain operational (3) All I/O modules and power distribution modules
(PDM) can be removed from the island.
The removable connectors make it easier to do this.
Standard digital output module
not congured “mandatory”
The other I/O modules remain operational (3)
Standard digital output module
congured “mandatory”
Output fallback according to conguration (3)(4)
The island switches to pre-operational mode.
The inputs are no longer updated on the network/eldbus.
Power distribution module (PDM) Not permitted
(1).The.reset.is.user-congurable:.automatic.on.elimination.of.the.fault.(default.factory.conguration).or.intentional.by.the.PLC..
Each.module.can.be.congured.independently.This.operation.requires.the.Advantys.STBSPU1ppp.conguration.software.
The.tripping.data.is.transmitted.to.the.PLC.via.the.NIM.network.interface.module
(2).The.fallback.is.user-congurable:.to.0.(default.factory.conguration),.to.1,.or.to.“hold.last.value”.for.warm.standby.and.hot.standby.applications..
Each.output.channel.on.each.module.can.be.congured.separately.
This.operation.requires.the.Advantys.STBSPU1ppp.conguration.software.
(3).The.STBSPU1ppp.conguration.software.can.be.connected.via.a.standard.NIM.All.standard.I/O.modules.can.be.congured.Basic.modules.are.not.
congurable.(default.factory.settings.only)
(4).For.standard.digital.output.modules,.the.fallback.state.is.congurable:.
-.Fallback.to.level.0.
-.Fallback.to.level.1.
-.Fallback.to.a.predened.level.of.the.output.range.for.analog.modules.
-.Hold.last.value
Modicon STB distributed I/O
solution
Digital I/O modules