Technical information
3434
References
The STBXBE00K modules are supplied with all related parts: mounting base, screw-type
connector, spring-type connector.
To set up these modules, the Advantys STBSPU1
configuration and setup software is
required. This can be obtained separately (see page 94) or via the Unity Pro software suite (see
page 90).
Description Use with standard STB Reference Weight
kg
EOS internal bus expansion
module
Installed at the end of the
segment (except for the last
segment on the island)
STBXBE1100K (1) –
BOS internal bus expansion
module
Installed at the beginning of
each expansion segment
STBXBE1300K (2) –
Bus expansion module to
external CANopen devices
To be installed at the end of
the last segment to connect
standard CANopen devices
STBXBE2100K –
Auxiliary power supply
24 V c/5 V c 1.2 A
To be installed in the primary
segment or in an expansion
segment (if necessary).
Must be combined with a
power distribution module
installed after it.
STBCPS2111K –
(1).Replaces.EOS.expansion.module.STBXBE1000K
(2).Replaces.BOS.expansion.module.STBXBE1200K
References
Modicon STB distributed I/O
solution
Internal bus expansion, CANopen expansion,
auxiliary power supply modules
STBXBE1100K
STBXBE2100K
STBCPS2111K
STBXBE1300K