Technical information

1414
Basic/standard Modicon STB functions
The table below sets out the main functions of the basic and standard Modicon STB
ranges:
I/O modules Network interface
modules (NIM)
Power distribution
modules (PDM)
Modicon STB Basic Standard Standard Basic Standard See page
Max. number of I/O modules 32 6
to 9
Removable terminals –
Mechanical keying pin 53
Cold swapping 6
Hot swapping (1) (1) 6, 15
Separate power supply to sensors and actuators (2) (2) 38
Built-in electronic protection of inputs and outputs (3) (4) –
Electronic protection of power supply provided by
Modicon STB for the sensors
–
Protection of power supplies by built-in removable fuse –
Status LEDs –
Compatible with all types of network interface module –
CANopen expansion - Device Integration (5) 10
Compatible with local HMI (Magelis) 100
Default conguration 84
Assistance with design, start-up, maintenance, power
consumption, auto mapping using Advantys software
(7) 84
Congurable I/O parameters (1) 85
Built-in reex functions (1) 89
Removable memory card (1)(8) 22
Advanced diagnostics (1). 86
Internal software (rmware) update 21
Function available Function not available Not applicable
(1).Requires.the.use.of.a.standard.NIM.module
(2).Requires.the.use.of.standard.PDM.modules
(3).Basic.PDM:.One.5.A.fuse.for.the.inputs.and.outputs
(4).Standard.PDM:.One.5.A.fuse.for.the.inputs.and.one.10.A.fuse.for.the.outputs
(5).Requires.the.use.of.Advantys.software,.acquired.separately.or.via.the.Unity.Pro.software
(6).In.ofine.mode.only
(7).In.ofine.and.online.modes
(8).For.assistance.with.the.island.internal.settings.Simplies.faulty.device.replacement.(FDR).
and.copying.of.the.island.settings
Functions.
Modicon STB distributed I/O
solution
Open and modular system