Technical information

1111
Congurations.(continued)
Modicon STB distributed I/O
solution
Open and modular system
Standard Modicon STB congurations (continued)
CANopen expansion module for TeSys U and TeSys T starter-controllers
The CANopen expansion module STBXBE2100K is used to connect TeSys U and
TeSys T starter-controllers, via a CANopen tap-off junction.
The TeSys U starter-controller must be equipped with the LULC08 CANopen
communication module.
The characteristics and advantages of this solution are:
 Advanced process control, such as reading current data, detailed diagnostics,
remote reset, etc.
 Conguration with SoMove software
 Hot swapping.possible (see page 15).
1
2 3
8
7
4
4
4
5
6
CANopen.daisy.chaining.of.TeSys.T.and.a.TeSys.U.tap.link.on.a.standard.Modicon.STB
The island bus in the above example comprises:
1 Modicon STB primary island segment.
2 STBN21: A standard network interface module.
3 STBXBE2100K: CANopen expansion module (max. 12 devices per island).
4 TSXCANCA: CANopen cable.
5 VW3CANTAP2: CANopen tap-off junction.
6 LULC08 CANopen communication module .
7 TeSys U (LUB) starter-controller with an advanced control unit (LUCB/C/D).
8 TeSys T motor management system (LTMRC) with CANopen communication
port.