Technical information

113
Merchant navy certications
Shipping classication societies
Certied
Certication pending
ABS BV DNV GL KRS LR RINA RMRS RRR PRS CCS
USA France Norway Germany Korea Great Britain Italy Russia Russia Poland China
Modicon OTB
Modicon STB (1).(2) (2) (2) (2) (2) (2)
Modicon Telefast ABE 7
ConneXium
Magelis
PC/GTW Bridge.(2)
Magelis XBT GT (2) (2) (2) (2) (2) (2) (2) (2)
Magelis XBT GK
Magelis XBT N/R
Magelis XBT RT
Magelis HMI GTO
Magelis HMI STO/STU (2) (2)
Modicon M340 (2) (2)
Modicon Momentum
Modicon Premium
Modicon Quantum
Modicon TSX Micro
Phaseo
Twido
(1).Also.covers.US.Navy.requirements.ABS-NRV part 4
(2).Depends.on.product;.please.visit.our.website:.wwwschneider-electriccom
EC regulations
European Directives
The open nature of the European markets assumes harmonization between the regulations set by the member states of the European Union.
European Directives are texts whose aim is to remove restrictions on free circulation of goods and which must be applied within all European
Union states.
Member states are obligated to incorporate each Directive into their national legislation, and to simultaneously withdraw any regulations that
contradict it.
Directives - and particularly those of a technical nature with which we are concerned - merely set out the objectives to be fullled (referred to as
“essential requirements”). Manufacturers must take all necessary measures to ensure that their products conform to the requirements of each
Directive applicable to their equipment.
As a general rule, manufacturers certify compliance with the essential requirements of the Directive(s) that apply to their products by applying a
 mark. The  mark is afxed to our products where applicable.
Signicance of the mark
The  mark on a product indicates the manufacturer's certication that the product conforms to the relevant European Directives; this is a
prerequisite for placing a product which is subject to the requirements of one or more Directives on the market and allowing its free circulation
within European Union countries. The  mark is intended for use by those responsible for regulating national markets.
Where electrical equipment is concerned, conformity to standards indicates that the product is t for use. Only a warranty by a well-known
manufacturer can provide assurance of a high level of quality.
As far as our products are concerned, one or more Directives are likely to apply in each case; in particular:
 The Low Voltage Directive (2006/95/EC)
 The Electromagnetic Compatibility Directive (2004/108/EC)
 The ATEX  Directive (94/9/EC)
Dangerous substances
These products are compatible with:
 The WEEE Directive (2002/96/EC)
 The RoHS Directive (2002/95/EC)
 The China RoHS Directive (Standard SJ/T 11363-2006)
 The REACH regulations Directive (EC 1907/2006)
Note: Documentation.on.sustainable.development.is.available.on.our.website.wwwschneider-electriccom.(product.environmental.profiles.and.instructions.for.use,.
ROHS.and.REACH.directives).
End of life (WEEE)
End of life products containing electronic cards must be dealt with by specic treatment processes.
When products containing backup batteries are unusable or at end of life they must be collected and treated separately. Batteries do not contain
a percentage by weight of heavy metals above the limit specied by European Directive 2006/66/EC.
Technical appendices
Automation product certications
EC regulations