Technical information
104104
Presentation
Two power supply offers are available for Modicon STB distributed I/O islands (1):
Phaseo regulated switch mode power supplies ABL8RPS/RPM/WPS
Phaseo regulated switch mode power supplies ABL4RSM/WSR.
Phaseo regulated switch mode power supplies ABL8RPS/RPM/WPS (2)
The ABL8RPS/RPM/WPS power supply offer is designed to provide the DC voltage
necessary for the control circuits of automation system equipment.
Comprising 6 products, this range meets requirements encountered in industrial and
commercial applications.
These compact electronic switch mode power supplies provide the quality of output
current required for the loads supplied and are compatible with the Modicon STB
ranges of distributed I/O and the Modicon M340, Premium and Quantum automation
platforms.
When used with additional function modules, they ensure continuity of service in the
event of power outages or application malfunctions.
Phaseo ABL8RPS/RPM/WPS power supplies must be connected in phase-to-
neutral or phase-to-phase for ABL8RPS/RPM and in 3-phase for ABL8WPS.
They deliver a voltage that is precise to within 3%, whatever the load and whatever
the type of line supply, within the following ranges:
85 to 132 V and 170 to 550 V
for ABL8RPS
85 to 132 V and 170 to 264 V for ABL8RPM
340 to 550 V for ABL8WPS
Conforming to IEC standards and UL and CSA certied, they are suitable for
universal use.
Phaseo regulated switch mode power supplies ABL4RSM/WSR (2)
The ABL4RSM/WSR power supply offer is designed to provide the DC voltage
necessary for the control circuits of automation system equipment consuming 85 W
to 960 W on 24 V.
Comprising 7 products, this range of power supplies meets the needs encountered
in industrial applications.
Using electronic switch mode technology, these power supplies provide a quality of
output current that is suitable for the loads supplied and compatible with the Modicon
STB ranges of distributed I/O and the Twido programmable controllers, the Modicon
logic controllers M238 and M258, the Modicon motion controllers LMC058, the
automation platforms M340, Premium and Quantum.
Due to their high overload withstand, the power supplies ABL4 are the power supply
solution for stepper motors, servo motors and integrated drives.
When used with function modules ABL8B/RED/D/P, they ensure continuity of
service in the event of power outages or application malfunctions. In addition, the
ABL4RSM24200 model can be used in a redundant power supply without an
additional redundancy module due to its integrated diode.
Their high effectiveness enables us to offer power supplies that are among the
smallest on the market, thus considerably reducing the space required in
enclosures.
Power supplies ABL4 must be connected in phase-to-neutral, phase-to-phase (3) for
the ABL4R, and in 3-phase for the ABL4W.
They deliver a voltage that is precise to within ± 1% whatever the load and whatever
the type of line supply, within the following ranges:
90…264 V for the ABL4RSM24035 and ABL4RSM24050,
90…132 V and 185…264 V for the ABL4RSM24100 and ABL4RSM24200,
340…550 V for the ABL4W.
Conforming to IEC standards and UL certied, the power supplies ABL4 are suitable
for universal use.
(1).Certain.offers.can.not.be.marketed.in.certain.countries,.please.consult.our.Customer.Care.
Center
(2).For.more.information.on.this.offer,.please.consult.our.web.site.wwwschneider-electriccom
(3).Only.on.certain.American.lines.supply.
ABL8RPS24050
Modicon.STB.distributed.I/O.island
Presentation
Modicon STB distributed I/O
solution
Phaseo regulated switch mode power supplies
ABL4RSM24050
Modicon.STB.distributed.I/O.island