Technical information

102102
Presentation (1)
Using the Modicon Telefast ABE7 connector or adapter system rationalizes and simplies electrical enclosure wiring.
Far less space is required in the enclosure and the Telefast ABE7 base replaces the connection terminals at the bottom of the enclosure.
The Modicon wiring system, with its Telefast and Telefast for Twido controllers bases, is particularly suitable for applications requiring:
 48 V and 48 V voltage I/O.
 A large number of 115 V  and 230 V  I/O.
 A large number of relay outputs.
Connection of Modicon STB I/O modules to the Telefast ABE7 system differs according to the type of module:
 16-channel digital I/O modules STBDDI3725 and STBDDO3705: Connection via Telefast HE 10 connectors and their associated Telefast
ribbon cables or cables. These connection components must be ordered separately (see description below and combinations on page 103).
 Other Modicon STB digital and analog I/O modules: Connection via screw or spring-type 5/6-way removable connectors, supplied with the
I/O modules and the associated pre-wired cables. The latter must be ordered separately (see below).
Description (1)
16-channel digital I/O modules STBDDI3725 and STBDDO3705 Other Modicon STB digital and analog I/O modules
1a
2a
3a
4
1b
2b
3b
4
1a Modicon STB I/O island incorporating a module with 16 I/O
STBDDI3725 or STBDDO3705.
2a HE10 connector STBXTS510 (DDI) or
STBXTS690 (DDO).
3a Rolled ribbon cable TSXCDP02 or connection cable
TSXCDP03 equipped with two 20-way HE10 connectors.
4 Modicon Telefast ABE7 connector or adapter base. See
combination table on page 103.
1b Modicon STB I/O island incorporating a digital I/O module
STBDDI/DDOK (except for 16-channel modules) or an
analog I/O module STBAVI/ACI/ART/AVO/ACOK.
2b Screw or spring-type 5/6-way removable connectors, supplied with
the STB I/O module.
3b Pre-wired cable TSXCDP301/501/1001 (length 3/5/10 meters)
with HE10 connector at one end and ying leads at the other end.
Cross-section 0.324 mm
2
, AWG24.
4 Modicon Telefast ABE7 connector or adapter base.
Redundancy solution for Modicon STB I/O (1)
Two Modicon STB I/O modules of the same type, located in two separate islands, can be connected to a single Telefast ABE7 pre-wired base
(redundancy of I/O). This conguration is used, for example, in the context of a Premium Hot Standby architecture, please refer to our “Modicon
Premium automation platform” catalogue.
Digital I/O modules are connected via a Telefast redundancy base ABE7ACC11 (inputs) or ABE7ACC10 (outputs) and the same connectors
and ribbon cables or cables used for single connections.
STB analog I/O modules are connected via JM Concept analog I/O multiplexers JK3000N2 (inputs) and
GK3000D1 (outputs).
(1).If.you.require.any.more.information.on.the.Telefast.wiring.system,.please.consult.our.Customer.Care.Centre
Presentation,..
description
Modicon STB distributed I/O
solution
STB I/O modules and Telefast ABE7
wiring system
2.0