IP 20 distributed inputs/outputs Modicon STB Catalogue May 2013 Unity Pro Advantys Unity Pro
How to find the “Automation and Control” products Catalogues Essential guides Complete product ranges Selection of the top selling products
General contents Modicon distributed I/O solutions selection guide. . . . . . . . . . . . . . . . . . . page 2 bb Open and modular system ....................................................................... page 4 bb Network interface modules Selection guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16 vv References............................................................................
Selection guide Type of splitter box and module Modicon distributed I/O solutions Monobloc IP 67 I/O splitter boxes Modicon ETB Available buses and networks Ethernet Modbus TCP/IP EtherNet/IP Max.
Monobloc IP 20 distributed I/O Optimum IP 20 distributed I/O Modular IP 20 distributed I/O Modicon Momentum Modicon OTB Modicon STB Ethernet Modbus TCP/IP Modbus Plus Fipio InterBus Profibus DP DeviceNet Ethernet Modbus TCP/IP CANopen Modbus (RS 485) Ethernet Modbus TCP/IP EtherNet/IP CANopen Modbus Plus Fipio InterBus Profibus DP DeviceNet 1 sub-base with 1 CPU or 1 communication module 1 interface module + 7 Twido expansion modules 1 NIM (Network Interface Module) + 32 I/O modules Sub-base wit
Presentation Modicon STB distributed I/O solution Open and modular system Presentation To meet the needs of machine manufacturers and users, automation architectures have been decentralized while delivering performance close to that of centralized systems. Architectures based around islands installed as close to the machine as possible reduce the time and cost of wiring for sensors and actuators, while increasing system availability.
Modicon STB distributed I/O solution Description Open and modular system Modicon STB modules The Modicon STB module references allow you to acquire, under a single reference, the following items: bb A module bb Its base bb The appropriate screw and/or spring-type connectors. The table below presents the contents of Modicon STB modules and the usual form for their references. These references are used in the descriptions contained in this catalogue (functions, characteristics, etc).
Composition Modicon STB distributed I/O solution Open and modular system Composition of a Modicon STB island A Modicon STB island is made up of one or more segments comprising PDM power distribution modules and I/O modules. An island starts with a NIM network interface module and ends with a bus terminator supplied with the NIM module. An island can be made up of a single segment or a primary segment and up to 6 expansion segments.
Configurations Modicon STB distributed I/O solution Open and modular system Standard Modicon STB configurations Single segment With a standard NIM network interface module it is possible to create an island with only one segment (“single” segment) comprising up to 32 I/O modules (excluding PDM power distribution modules, NIM network interface module, bus termination and auxiliary power supply). 1 2 3 4 5 2 3 4 5 6 32 I/O modules max.
Configurations (continued) Modicon STB distributed I/O solution Open and modular system Standard Modicon STB configurations (continued) Primary segment with expansion segments The island bus can support the primary segment with up to 6 expansion segments (7 segments in all). A standard NIM network interface module supports up to 32 I/O modules (excluding power distribution modules, network interface modules, bus termination, auxiliary power supplies, and EOS/BOS bus expansion modules).
Configurations (continued) Modicon STB distributed I/O solution Open and modular system Standard Modicon STB configurations (continued) CANopen expansion module - Device Integration The CANopen expansion module STBXBE2100K can be used to connect, at the end of the segment, external CANopen devices such as: bb Modicon FTB IP67 I/O, in plastic or metal casing bb ATV31C/312/32/61/71 variable speed drives (1) bb Festo CPV-CO2 electropneumatic valves bb Parker P2M2HBVC11600 electropneumatic valves bb Balluff M
Configurations (continued) Modicon STB distributed I/O solution Open and modular system Standard Modicon STB configurations (continued) Application-specific module for TeSys U and TeSys Quickfit startercontrollers The STBEPI2145K parallel interface module is used to connect TeSys U starter‑controllers and TeSys Quickfit motor starters. The TeSys U starter-controller must be equipped with the LUFC00 parallel communication module.
Configurations (continued) Modicon STB distributed I/O solution Open and modular system Standard Modicon STB configurations (continued) CANopen expansion module for TeSys U and TeSys T starter-controllers The CANopen expansion module STBXBE2100K is used to connect TeSys U and TeSys T starter-controllers, via a CANopen tap-off junction. The TeSys U starter-controller must be equipped with the LULC08 CANopen communication module.
Configurations (continued) Modicon STB distributed I/O solution Open and modular system Standard Modicon STB configurations (continued) TeSys U starter-controller as preferred module The island bus can support TeSys U starter-controllers as preferred modules (installation between 2 island segments). TeSys U starter-controllers must be equipped with a Modicon STB LULC15 serial communication module.
Modicon STB distributed I/O solution Configurations (continued) Open and modular system Example of control system configuration NIM network interface modules STBNpp2p1p, located at the beginning of each island, are gateways for exchanging data between the network or bus master PLC and the Modicon STB automation island. Standard NIM STBNpp2p1p modules can be used to configure and address the installation external devices. These settings are stored in the module’s internal RAM or Flash memory.
Functions Modicon STB distributed I/O solution Open and modular system Basic/standard Modicon STB functions The table below sets out the main functions of the basic and standard Modicon STB ranges: I/O modules Modicon STB Max.
Functions (continued) Modicon STB distributed I/O solution Open and modular system Hot swapping When a module on the standard type Modicon STB island is unplugged under power, the behaviour of the other modules depends on the parameter settings of standard type I/O modules : bb Mandatory or optional module bb Configured fallback type per channel.
Selection guide Modicon STB distributed I/O solution Network interface modules Applications Data exchange between master PLC and Modicon STB island I/O modules Bus or network type Ethernet Modbus TCP/IP, dual port Bus or network Structure Type Industrial LAN Topology Standard, daisy chain, daisy-chain loop Compliance with standards IEEE 802.
Data exchange between master PLC and Modicon STB island I/O modules EtherNet/IP CANopen bus Industrial LAN CAN fieldbus Standard IEEE 802.3 CIA DS-301 10/100 BASE-T, half/full duplex ISO 1198 10/100 Mbps 10 kbps…1 Mbps depending on bus length Double shielded twisted pair via Ethernet ConneXium cabling system Double shielded twisted pair 256 max. per segment, unlimited with switches 127 slaves 100 m according to 802.
Selection guide (continued) Modicon STB distributed I/O solution Network interface modules Applications Bus or network type Bus or network Structure Data exchange between master PLC and Modicon STB island I/O modules Modbus Plus Fipio Type Industrial LAN compliant with the Modbus Plus standard Open industrial fieldbus compliant with the FIP standard Compliance with standards modbus.
Data exchange between master PLC and Modicon STB island I/O modules InterBus Profibus DP DeviceNet InterBus industrial field bus (generation 4) Profibus DP V.0 industrial field bus Network compliant with v.2.0 of the Open DeviceNet Vendor Assoc. (ODVA) INTERBus Club DIN 19245, Parts 1 and 3 Open DeviceNet Vendors Association Isolated RS 485 RS 485 – 500 kbps 9.6 kbps…12 Mbps 125, 250 or 500 kbps Shielded twisted pair Twisted pair 512 slaves max.
Presentation Modicon STB distributed I/O solution Network interface modules Presentation 1 The range of NIM network interface modules comprises 9 standard NIM modules.
Modicon STB distributed I/O solution Description Network interface modules Description STBNpp2p1p network interface modules 1 5 6 3 7 8 9 4 STBNCO2212 CANopen bus interface module 1 5 2 6 7 3 8 9 4 Indication Green RUN LED Green PWR LED Red ERR LED 1 to 3 status LEDs Yellow Test LED Island status: auto-configuration, operational, error, etc.
Modicon STB distributed I/O solution References Network interface modules Network interface modules (1) Network or bus 1 2 3 Range Supply voltage Reference Ethernet Modbus TCP/IP, dual port Ethernet Modbus TCP/IP Standard 24 V c STBNIP2311 0.140 Standard 24 V c STBNIP2212 0.130 EtherNet/IP Standard 24 V c STBNIC2212 0.135 CANopen Standard 24 V c STBNCO2212 0.135 Modbus Plus Standard 24 V c STBNMP2212 0.145 Fipio Standard 24 V c STBNFP2212 0.
References (continued) Modicon STB distributed I/O solution Bus and network connection accessories Spare parts Description Removable terminals for 24 V c power supply 2-way Description Bus terminator Type Sold in lots of Reference Screw-type 10 STBXTS1120 0.003 Spring-type 10 STBXTS2120 0.
References (continued) Modicon STB distributed I/O solution Bus and network connection accessories Bus and network connection accessories (continued) Ethernet network (1) 1 Description Straight-through shielded twisted pair cables e compatible Preassembled at both ends Type Length Reference 2 x RJ45 connectors For connection to terminal equipment (DTE) Standard 2m 490NTW00002 Weight kg – 5m 490NTW00005 – 12 m 490NTW00012 – 40 m 490NTW00040 – 80 m 490NTW00080 – 1m TCSECE3M3M1S4 –
References (continued) Modicon STB distributed I/O solution Bus and network connection accessories Bus and network connection accessories (continued) Ethernet bus (1) Description Connexium unmanaged switches (continued) Connexium managed switches TCSESM043F2CSO TCSESM083F23FO TCSESM083F2CSO Port type and number Reference bb 4 x 10BASE-T/100BASE-TX ports (copper cable), RJ45 shielded connectors bb 1 x 100BASE-FX port (single-mode optical fibre), duplex SC connector 499NSS25101 Weight kg 0.
References (continued) Modicon STB distributed I/O solution Bus and network connection accessories Bus and network connection accessories (continued) Ethernet network (1) 1 Description Connexium managed switches (continued) 2 3 TCSESM243F2CUO 4 5 6 Port type and number Reference 16 x 10/100BASE-TX ports (copper cable), RJ45 shielded connectors TCSESM163F23F0 Weight kg 0.
References (continued) Modicon STB distributed I/O solution Bus and network connection accessories Bus and network connection accessories (continued) TCSWABDH Ethernet network (continued) (1) Description Type ConneXium Wi-Fi antennas Dual band 2300 - 2500 hemispherical antenna 4900 - 5935 5 GHz Very directional antenna TCSWAB5DN Dual band omnidirectional 11n antenna TCSWAB5D TCSWAB2D Gain MHz dBi 5150 - 5350 Degree of protection Reference IP 65 TCSGWABDH 0.
References (continued) Modicon STB distributed I/O solution Bus and network connection accessories Bus and network connection accessories (continued) Modbus Plus network 1 2 Description ASMBKT085 IP 20 junction box for T-connections 990NAD23000 0.230 IP 65 junction box for T-connections, supports one RJ45 connector on front panel 990NAD23010 0.
References (continued) Modicon STB distributed I/O solution Bus and network connection accessories Bus and network connection accessories (continued) Profibus DP bus Description Use Length – 490NAD91103 Weight kg – – 490NAD91104 – Intermediate connection with terminal port – 490NAD91105 – – 100 m TSXPBSCA100 – 400 m TSXPBSCA400 – Connectors for STBNDP2212 Line terminator network interface module Intermediate connection Profibus DP connection cables Reference DeviceNet network Descrip
Selection guide Modicon STB distributed I/O solution Internal bus expansion,CANopen expansion, auxiliary power supply module Applications Modicon STB island bus expansion Interface connectors EOS end of segment BOS beginning of segment Island bus Firewire connector (1) Firewire connector 24 V c external power supply Screw or spring-type 2-way removable connector Base STBXBA2400, size 2 (18.
Modicon STB island bus expansion Island bus expansion for standard CANopen devices Auxiliary power supply Screw or spring-type 5-way removable connector – – Screw or spring-type 2-way removable connector STBXBA2000, size 2 (18.4 mm) STBXBA2100, size 2 (18.4 mm) – 24 V c non-isolated (19.2…30 V) (2) – Additional 5 V c logic power supply (7) – Yes – Yes – Yes, automatically resettable internal fuse – 5.25 V c ± 0.21% – 1.
Presentation Modicon STB distributed I/O solution Internal bus expansion, CANopen expansion, auxiliary power supply modules Presentation EOS and BOS internal bus expansion modules STBXBE1p00K EOS and BOS internal bus expansion modules can be used to extend the island bus beyond the primary segment: there can be up to 6 expansion segments.
Modicon STB distributed I/O solution Description Internal bus expansion, CANopen expansion, auxiliary power supply modules 8 Description 1 2 The internal bus expansion modules, CANopen expansion module and auxiliary power supply module comprise: 1 Two catches for locking the module onto the base.
Modicon STB distributed I/O solution References Internal bus expansion, CANopen expansion, auxiliary power supply modules References The STBXBEpp00K modules are supplied with all related parts: mounting base, screw-type connector, spring-type connector. To set up these modules, the Advantys STBSPU1ppp configuration and setup software is required. This can be obtained separately (see page 94) or via the Unity Pro software suite (see page 90).
References (continued) Modicon STB distributed I/O solution Internal bus expansion, CANopen expansion, auxiliary power supply modules References (continued) Mandatory separate parts Description For use with Island bus STBXBE expansion cables 1p00 Length Reference 0.3 m STBXCA1001 Weight kg – 1m STBXCA1002 – 4.5 m STBXCA1003 – 10 m STBXCA1004 – 14 m STBXCA1006 – Optional parts Description Keying pins Sheets of usercustomizable labels (1) Description Insulated screwdriver, 2.
Selection guide Modicon STB distributed I/O solution Power distribution modules Applications Distribution of the sensor and actuator power supplies to the Modicon STB I/O modules Power supply 24 V c (1) Interface connectors Shared sensor and actuator power supply (inputs and outputs) Sensor power supply (inputs) 1 screw or spring-type 2-way removable connector – – 1 screw or spring-type 2-way removable connector Actuator power supply (outputs) – 1 screw or spring-type 2-way removable connector
Distribution of the sensor and actuator power supplies to the Modicon STB I/O modules 115/230 V a (2) 115/230 V a (2) 1 screw or spring-type 2-way removable connector – – 1 screw or spring-type 2-way removable connector – 1 screw or spring-type 2-way removable connector Captive screw on mounting base, identified by its yellow/green colour STBXBA2200, size 2 (18.
Presentation Modicon STB distributed I/O solution Power distribution modules Presentation Power distribution modules (PDM) distribute the sensor and actuator field power supplies to the I/O modules of the island segments which require them. These power supplies are distributed via the bases of the modules that are mechanically and electrically interconnected.
Presentation (continued) Modicon STB distributed I/O solution Power distribution modules 115/230 V a Presentation (continued) 115/230 V a Basic PDM modules STBPDTp105K basic PDM modules distribute the sensor and actuator field power supplies to the I/O modules (1) via a single supply bus 3. Basic PDM modules have 1 removable fuse, to protect the I/O modules they supply.
Modicon STB distributed I/O solution Combinations Power distribution modules Combinations of power distribution modules and STB I/O modules STB power distribution module Voltage STB I/O modules Digital (discrete) Inputs Outputs Solid state DDI3230K DDO3200K DDI3420K DDO3230K DDI3610K DDO3410K DDI3425K DDO3600K DDI3615K DDO3415K DDI3725pp DDO3605K DDO3705pp STBPDT3100K (standard PDM module) 24 V c STBPDT2100K (standard PDM module) 115 V a DAI5230K DAI5260K DAO8210K DAO5260K 230 V a DAI7220K STB
Modicon STB distributed I/O solution Description Power distribution modules 10 Description 1 2 (On STBPDTp100K standard modules only) 3 4 8 5 1 9 STB power distribution modules LED State Indication Green IN LED On The sensor (input) field power supply is present. Off The module is not receiving any external power supply or the fuse is blown or the module is faulty. On The actuator (output) field power supply is present.
References Modicon STB distributed I/O solution Power distribution modules References The STBPDTp10pK power distribution modules are supplied with all the required parts: screw-type connectors, spring-type connectors and mounting base. Power distribution modules Type of power supply c Voltage Type Reference 24 V Standard Basic STBPDT3100K STBPDT3105K Weight kg 0.130 0.130 a 115/230 V Standard Basic STBPDT2100K STBPDT2105K 0.129 0.
References (continued) Modicon STB distributed I/O solution Power distribution modules References (continued) Spare parts Description Mounting base (width 18.4 mm) Description STBXSP3000 + STBXSP3010/3020 Removable terminals (2-way) (1) Designation Fuses (2) Use for Reference Mounting STBPDTp10pK power distribution modules STBXBA2200 Weight kg 0.035 For use with Sold in Reference lots of Screw-type 10 STBXTS1130 0.006 Spring-type 10 STBXTS2130 0.
Modicon STB distributed I/O solution Selection guide Digital I/O modules DC inputs Applications Digital (discrete) input modules DC Nominal input voltage 24 V c Number of channels 2 4 Sensor type 2 or 3-wire + earth 2 or 3-wire Inputs Logic Response time Default User-configurable (1) Type (IEC/EN 61131-2) Internal power supply for 3-wire sensors Type 2 Yes (2 outputs) Type 1+ Yes (4 outputs) Off-to-on 610 ms with 0.2 ms input filter time 625 ms with 0.2 ms input filter time 3.
0 Digital (discrete) input modules DC 24 V c 6 16 2-wire 2 or 3-wire Positive on each channel – Positive or negative, selection by channel Type 1 No – Type 3 Yes (4 outputs) 5.25 ms 1.21 ms 2 ms 5.75 ms 1.74 ms 2 ms 5 ms – 1 ms – Two connectors (6-way): STBXTS1100 (screw-type) or STBXTS2100 (spring-type) STBXBA1000, size 1 (13.9 mm) Two connectors (18-way): STBXTS1180 (screw-type) or STBXTS2180 (spring-type) STBXBA3000, size 3 (28.
Selection guide (continued) Modicon STB distributed I/O solution Digital I/O modules DC (transistor) outputs Applications Digital (discrete) output modules DC (transistor) Nominal output voltage 24 V c Number of channels Outputs Logic Default User-configurable (1) Internal power supply for 3-wire actuators Load current 2 4 Positive on each channel Positive or negative, selection by channel – Yes No 0.5 A Response time 2A Off-to-on 620 ms for a 0.
Digital (discrete) output modules DC (transistor) 24 V c 6 16 Positive – Positive or negative, selection by channel – 0.25 A 0.5 A 0.5 max. per channel 550 ms at a resistive load of 250 mA 715 ms for a 0.5 A load 2 ms at 0.5 A load 900 ms at a resistive load of 250 mA 955 ms for a 0.5 A load 2 ms at 0.5 A load All channels to 0 – Yes (2) – Manual reset – Yes (3) No Two STBXTS1100 screw-type or STBXTS2100 spring-type 6-way connectors STBXBA1000, size 1 (13.
Selection guide (continued) Modicon STB distributed I/O solution Digital I/O modules AC inputs Applications Digital (discrete) input modules AC Nominal input values Voltage Frequence 115 V a 50/60 Hz Number of channels 2 Sensor type 2 or 3-wire + earth Inputs Logic Default User-configurable (1) Type (IEC/EN 61131-2) Internal power supply for 3-wire sensors Connection 2-wire Positive Positive or negative, selection by channel Type 1 Yes No Two STBXTS1110 screw-type or STBXTS2110 spring-type
Digital (discrete) input modules AC 230 V a 50/60 Hz 2 2 or 3-wire + earth Positive Positive or negative, selection by channel Type 1 Yes Two STBXTS1110 screw-type or STBXTS2110 spring-type 5-way connectors STBXBA2000, size 2 (18.4 mm) 230 V a STBPDT2100/2105K a 1780 V for 1 minute – Yes Yes, 5 A time-lag fuse on the power distribution module (PDM) Yes Yes, with standard NIM only Yes, 2 max. 0…60°C (4) 40 mA STBDAI7220K 56 More technical information on www.schneider-electric.
Selection guide (continued) Modicon STB distributed I/O solution Digital I/O modules DC/AC (relay) and AC (triac) outputs Applications Digital (discrete) output modules DC/AC (relay) Nominal output voltage 24 V c (relay contact) 115/230 V a (relay contact) Number of channels Outputs 2 NO/NC contact relays and common Logic Default User-configurable (1) Internal power supply for 3-wire actuators Load current 2 contact relays NO + NC Positive Positive or negative, selection by channel No 2 A per con
Digital (discrete) output modules AC (triac) 115 V a 115/230 V a 2 Positive Positive or negative, selection by channel Yes 2 A at 30°C 1 A at 60°C 0.5 cycles 0.5 cycles 10 ms 10.5 ms Both channels to 0 Hold last value or each channel set to 0 or 1 Two STBXTS1100 screw-type or STBXTS2110 spring-type 5-way connectors STBXBA2000, size 2 (18.
Presentation,. description Modicon STB distributed I/O solution Digital I/O modules Presentation 7 The digital (discrete) I/O modules offer in the Modicon STB range comprises standard and basic modules of the following types: bb Digital input modules bb Solid state digital output modules bb Digital relay output modules Standard digital I/O modules can be configured by the user, via the STBSPU1ppp Advantys STB configuration software, connected to the island's standard NIM network interface module.
Description (continued) Modicon STB distributed I/O solution Digital I/O modules Description (continued) Mandatory separate parts 16-channel digital I/O module base: Module size 3 Width 28.1 mm Base reference STBXBA3000 This base has to be ordered separately when using 16-channel modules with the Modicon Telefast ABE 7 pre-wired system.
Modicon STB distributed I/O solution Functions Digital I/O modules STB digital output module operating modes Output protection and reset following overload or short-circuit Modicon STB digital output module Short-circuit and thermal overload protection Actuator power supply protection Reset Diagnostics Basic modules, STBDDO3415K, 3605K, 3705pp Internal electronic Via PDM fuse On elimination of the fault Per group of 2 channels Standard modules, STBDDO3200K, 3230K Actuator powered by the modul
Associations Modicon STB distributed I/O solution Digital I/O modules Compatibility of STB digital input modules with inductive proximity sensors and photo-electric sensors Details of the compatibility of Modicon STB digital input modules with OsiSense XS inductive proximity sensors and OsiSense XU photoelectric sensors are given on page 108.
Modicon STB distributed I/O solution References Digital I/O modules References Basic digital input modules Input voltage Connectors 24 V c Number of Compliance with channels standard IEC/EN 61131-2 screw-type and 4 Type 1+ spring-type 6 Type 1 STBDDI3425K 0.111 STBDDI3615K 0.112 screw-type spring-type – STBDDI3725KS STBDDI3725KC STBDDI3725 (1) 0.
References (continued) Modicon STB distributed I/O solution Digital I/O modules References (continued) Standard relay output modules Output Connectors Output Number voltage current of channels 24 V c screw-type 2A 2 or and 115/ spring-type 7A 2 230 V a (relay) Compliance with standard IEC/EN 61131-2 Yes Reference Weight kg STBDRC3210K 0.130 Yes STBDRA3290K 0.130 Compliance with standard IEC/EN 61131-2 Yes Reference STBDAO5260K 0.067 Yes STBDAO8210K 0.
Selection guide Modicon STB distributed I/O solution Analog I/O modules Voltage inputs Applications Analog input modules Voltage Number of channels 2 Range 0…10 V - 10...
Analog input modules Voltage 4 8 1…5 V, 0…5 V, 0…10 V, -5 V…+5 V, -10 V…+10 V (default) 15 bits + sign 30 V c (when sensor voltage is separate from logic bus voltage) – 13 ms 22 ms for all 8 channels 25 Hz – 2 x STBXTS1100 screw-type or STBXTS2100 spring-type 6-way connectors STBXBA2000, size 2 (18.
Selection guide (continued) Modicon STB distributed I/O solution Analog I/O modules Current and multirange inputs Applications Analog input modules Current Number of channels 2 Range 4…20 mA 0...
Analog input modules Current Multirange 4 4…20 mA (default) 0...20 mA 4…20 mA (default) 0...20 mA HART protocol tolerant 8 2 4…20 mA (default) 0...20 mA Thermocouples B, E, J, K, R, S and T Temperature probe Pt 100, Pt 1000, Ni 100, Ni 1000, Cu 10 ± 80 mV 30 V c (when sensor voltage is separate from logic bus voltage) – – 15 bits + sign 200 V c 8 ms for all 4 channels 80 ms for all 4 channels – – 150...
Selection guide (continued) Modicon STB distributed I/O solution Analog I/O modules Voltage and current outputs Applications Analog output modules Voltage Number of channels 2 Range 0...10 V - 10…+ 10 V Resolution 10 bits 9 bits + sign Isolation Channel-to-channel 0...+ 10 V (default) - 10...+ 10 V 1...5 V 0...5 V 0...10 V -5...+5 V -10...
Analog output modules Current 1 2 4...20 mA 0...20 mA 4...20 mA 12 bits 15 bits + sign 15 bits + sign 10 bits – 30 V c (when actuator voltage is separate from logic bus voltage) 200 V c 12 ms 3 ms for both channels 4 ms for both channels – – 8 ms 25 ms for both channels Yes No 1 x STBXTS1100 screw-type or STBXTS2100 spring-type 6-way connector 2 x STBXTS1100 screw-type or STBXTS2100 spring-type 6-way connectors 4...20 mA 0.
Presentation Modicon STB distributed I/O solution Analog I/O modules Presentation The STB Modicon range of analog input modules is used for the acquisition of various analog values encountered in industrial applications. STB analog output modules are used to control analog-controlled actuators such as variable speed drives, proportional control valves, etc. The STB analog I/O module offer comprises 6 basic modules and 13 standard modules.
Modicon STB distributed I/O solution Description Analog I/O modules Description 7 1 2 Analog I/O modules comprise: 1 Two latches for locking the module on the base. 2 An LED display block indicating the various states of the module: Basic I/O modules Standard I/O modules Indication Green RDY LED Green RDY LED Module status (1) – Red ERR LED Module error (2) 3 4 6 5 1 3 4 5 6 7 A slot for a customizable label (on the module).
Modicon STB distributed I/O solution References Analog I/O modules References Modicon STB analog I/O modules are supplied with the appropriate base for the module, two screw-type connectors and two spring-type connectors (except for the STBACO0120K 1-channel analog output module, which is supplied with the base, one screw-type connector and one spring-type connector).
References (continued) Modicon STB distributed I/O solution Analog I/O modules Separate parts References (continued) Optional parts Details Use for Sold in lots of – Reference Terminals for earthing kit Cables, cross-section 1.5...6 mm2 10 STBXSP3010 – Cables, cross-section 5...
Selection guide Modicon STB distributed I/O solution Application-specific modules Applications Parallel interface for TeSys U and TeSys Quickfit starter-controllers Counting Interface connections 4 RJ45 connectors (cables to be ordered separately) 18-way spring-type removable connector (supplied with the module) Mounting base (supplied with the module) Swapping Yes Hot swap Yes, depending on NIM and configuration with Advantys STB configuration software Power supply Consumption Inputs Input lo
Applications HART multiplexer Interface connections STBXTS2150, 18-way spring-type removable connector (supplied with the module) Mounting base (supplied with the module) STBXBA3000, size 3 (28.1 mm) Swapping – Cold swap Hot swap Power supply Operating voltage range Consumption Yes c 24 V c 19.
Modicon STB distributed I/O solution Description Parallel interface module STBEPI2145K TeSys U and TeSys Quickfit applications Description 8 1 2 3 4 5 7 6 1 The STBEPI2145K application-specific parallel interface module is a component of the Modicon STB island designed for the remote connection of TeSys U startercontrollers and TeSys Quickfit prewired motor starters. The STBEPI2145K application-specific parallel interface module comprises: 1 Two latches for locking the module on the base.
Description (continued) Modicon STB distributed I/O solution Parallel interface module STBEPI2145K TeSys U and TeSys Quickfit applications 1 3 2 4 5 5 TeSys U starter control application Presentation of the TeSys U starter-controller (1) The TeSys U starter-controller is a direct motor starter that performs the following functions: bb Protection and control of single-phase or three-phase motors: vv Disconnects power vv Protects against overcurrent and short circuits vv Protects against thermal overl
Modicon STB distributed I/O solution Description (continued) TeSys Quickfit for motor starter components TeSys Quickfit components for motor starters TeSys Quickfit is a modular system that standardizes and simplifies the installation of motor starters. Combined with GV2 ME circuit breakers and model d (LC1) contactors from 9 to 25 A, TeSys Quickfit simplifies the installation of motor starters with spring-type terminals up to 11 kW/400V.
Description (continued) Modicon STB distributed I/O solution TeSys Quickfit for motor starter components TeSys Quickfit components for motor starters (continued) 9 Elements for prewiring the control section For prewiring the control section, the TeSys Quickfit system provides the control connection module 8 LAD9AP3pp for connecting motor starters to the processing unit (PLC) via the Modicon parallel interface module 9 STBEPI2145K without the use of tools.
Modicon STB distributed I/O solution References Parallel interface module STBEPI2145K TeSys U and TeSys Quickfit applications References The STBEPI2145K parallel interface module is supplied with the appropriate mounting base for the module. Module for TeSys U and TeSys Quickfit starter-controllers Power supply type Voltage Reference c 24 V STBEPI2145K Weight kg 0.165 Mandatory separate parts Description Connecting cables An RJ45 connector at each end STBEPI2145K Use No.
Modicon STB distributed I/O solution Schematic diagrams Parallel interface module STBEPI2145K TeSys U applications TeSys U starter-controllers: Remote control Simple connection of an STBEPI2145K parallel interface module to 4 TeSys U starter-controllers for remote control via PLC. For each TeSys U starter-controller: bb LU9BN11 or LU9BM1: Prewired coil, supplied with the TeSys U power base. bb LUFC00, parallel communication module: to be ordered separately. bb 1 RJ45 cable (1).
Modicon STB distributed I/O solution Presentation,. description STBEHC3020KC counter module Presentation Counting parts or events, grouping objects, controlling incoming and outgoing data streams, and measuring lengths or positions, all require counting functions. The STBEHC3020KC counter module performs these functions for a Modicon STB automation island (controlled by a master connected to the island) with a maximum counting frequency of 40 kHz.
Functions Modicon STB distributed I/O solution STBEHC3020KC counter module Operation Counter channel block diagram IN A and IN B counter inputs Output function block Counter block Output function block EN and RST auxiliary inputs Compare block High threshold Low threshold Island bus master 24 V 0.
Functions (continued) Modicon STB distributed I/O solution STBEHC3020KC counter module Functional characteristics Configurable functions 78 Number 1 of the 6 configurable functions (using the Advantys configuration software) Frequency meter This basic function measures the frequency received on the IN A input. This frequency is always expressed in hertz (number of pulses per second), with a precision of 1 Hz. Also measures the speed in units per second.
References Modicon STB distributed I/O solution STBEHC3020KC counter module PF516001 References The STBEHC3020KC counter module is supplied with the appropriate base for the module and the 18-way spring-type removable connector.
Modicon STB distributed I/O solution Presentation STBAHI8321KC HART Multiplexer Presentation Highway Addressable Remote Transducer Protocol (HART) is the global standard for sending and receiving digital information across analog wires between smart devices and a control or monitoring system. The standard is controlled by the HART Communications Foundation. bb Most control systems can only monitor or control a single field instrument’s variable via the analog signal.
Modicon STB distributed I/O solution Presentation (continued) STBAHI8321KC HART Multiplexer Application examples HART multiplexer in a global automation architecture Ethernet HART Multiplexer Quantum PLC Ethernet Modbus/TCP 10/100T INPUT A A B B RDY ERR CH1 CH2 CH3 CH4 PWR AHI8321 RDY ERR ACI8320 RDY ERR AHI8321 IN OUT ACO0220 TEST ACO0220 RUN PWR ERR STS PDT3100 NIP2311 RDY ERR CH1 CH2 CH3 CH4 A Vijeo Citec SCADA DC OUTPUT 1 3 5 7 9 11 13 15 17 2 4 6 8 10 12 14 16 18 B 1 3
Selection guide Software Unity Pro software Unity Pro programming software for Modicon M340 M, Premium P, Quantum Q, Safety S and Modicon distributed I/O D platforms IEC 61131-3 languages Instruction List (IL) Ladder (LD) M-D M-D M-P-D M-P-D Structured Text (ST) M-D M-P-D Function Block Diagram (FBD) M-D M-P-D Sequential Function Chart (SFC)/Grafcet M-D M-P-D Ladder Logic Language LL984 M M Programming services M-D M-P-D Functional view and function modules M-D M-P-D DFB editor and
Unity Pro programming software for Modicon M340 M, Premium P, Quantum Q, Safety S and Modicon distributed I/O D platforms M-P-Q-D M-P-Q-D M-P-Q-D M-P-Q-D M-P-Q-D M-P-Q-S-D M-P-Q-D M-P-Q-D M-P-Q-D M-P-Q-D M-P-Q-D M-P-Q-S-D M-P-Q-D M-P-Q-D M-P-Q-D M-Q M-Q M-Q M-P-Q-D M-P-Q-D M-P-Q-D P (TSXP575p) - Q (140CPU651/671) - D P (TSXP575p) - Q (140CPU651/671)- D M-P-Q-D M-P-Q-D M-P-Q-S-D M-P-Q-D M-P-Q-D M-P-Q-S-D M-P-Q-D M-P-Q-D M-P-Q-D M-P-Q-D M-P-Q-D M-P-Q-D M-P-Q-D M-P-Q-D M-P-Q-D
Modicon STB distributed I/O solution Presentation Advantys Configuration and debugging software Presentation Advantys STBSPU1ppp software is the configuration and debugging tool for the Modicon STB, OTB (IP20 protection) and FTB/FTM (IP67 protection) range of distributed I/O solutions. It also enables debugging and diagnostics of distributed I/O islands during operation.
Functions Modicon STB distributed I/O solution Advantys Configuration and debugging software Functions Module editor The module editor includes between 4 and 7 tabs, depending on the module type: General, Parameters, Ethernet Parameters, I/O Image, Diagnostics, Options and I/O Mapping. Access to these tabs depends on whether or not the island is connected to the network or fieldbus.
Functions (continued) Modicon STB distributed I/O solution Advantys Configuration and debugging software Functions (continued) Module editor (continued) “Diagnostics” tab This tab allows the user to perform diagnostics for the island connected to the PC terminal where the Advantys configuration and debugging software resides. “Options” tab Module with 8 analog input channels STBACI1400K -.
Functions (continued) Modicon STB distributed I/O solution Advantys Configuration and debugging software Functions (continued) Analysis of the island memory and power supply resources Power supply and memory resource analysis At any time during the configuration process, you can consult the following information as a percentage: bb The power consumption table for the various voltages: vv The 5 V c logic voltage provided by the network interface module STBNpp vv The 5 V c logic voltage supplied by the
Functions (continued) Modicon STB distributed I/O solution Advantys Configuration and debugging software Functions (continued) Export user defined labels (“tags”) The Advantys software allows you to create tags (symbol names) for all objects and I/O parameters of the Modicon STB configuration, including external devices connected to the CANopen bus. The “File/export” function exports these names at the same time as the mapping, regardless of the fieldbus or network used.
Functions (continued) Modicon STB distributed I/O solution Advantys Configuration and debugging software Functions (continued) Reflex functions editor For applications requiring short response times (< 3 ms), the Modicon STB distributed I/O solution allows you to create reflex functions using the configuration and debugging software. These reflex functions act directly at the level of the island output modules and therefore are not taken into account or processed by the island master.
References Software Unity Pro software Small/Medium/Large/Extra Large References Unity Pro Small, Medium, Large and Extra Large software packages Unity Pro These software packages are for programming and setting up Unity automation platforms.
References (continued) Software Unity Pro software Small/Medium/Large/Extra Large Unity Pro Medium version 7.0 software For Modicon M340: All models For Modicon Premium: TSX571p...2p For distributed I/O: Modicon ETB, TM7, OTB, STB, Momentum Unity Pro Unity Pro Medium version 7.
References (continued) Software Unity Pro software Small/Medium/Large/Extra Large Unity Pro Extra Large version 7.0 software For Modicon M340: All models For Modicon Premium: TSX571p...6p For Modicon Quantum: 140CPU31110/43412U/53414U/65150/65160/65260/67160/67260/67261 For distributed I/O: Modicon ETB, TM7, OTB, STB, Momentum Unity Pro Unity Pro Extra Large version 7.
References (continued) Software Unity Pro software Small/Medium/Large/Extra Large Accessories for connecting to the PC programming terminal Description PC terminal connection cables (PC to PLC) BMXXCAUSBH0pp TSXPCX1031 TSXCUSB485 Length Reference 1.8 m BMXXCAUSBH018 0.065 4.5 m BMXXCAUSBH045 0.110 RS 232D 2.5 m (9-way SUB-D connector) TSXPCX1031 0.170 USB port (USB/RS 485 converter) 0.4 m TSXCUSB485 0.144 USB port (mini-DIN/ RJ45 cordset) 2.
References Modicon STB distributed I/O solution Advantys configuration and debugging software References The Advantys configuration and debugging software is multilingual and compatible with the following operating systems: bb Windows XP Professional SP3 32-bit. bb Windows Vista Business SP1 32-bit. bb Windows Vista Ultimate SP1 32-bit. bb Windows 7 Professional 32-bit. bb Windows 7 Ultimate 32-bit. bb Windows 7 Enterprise 32-bit. bb Windows 7 Professional 64-bit.
References (continued) Modicon STB distributed I/O solution Advantys configuration and debugging software References (continued) References, Alliance SI programme Description Used with Reference Advantys configuration and debugging software 10 workstations on one site for a member of the Alliance SI programme Includes 10 cables and 10 CD-ROMs STBSPU1010 Weight kg – Subscription to Advantys configuration and debugging software Duration: 1 year 10 workstations on one site for a member of the Allianc
Presentation Modicon STB distributed I/O solution Momentum 171CBB97030 processor Open and modular system Presentation The Momentum 171CBB97030 processor integrates a full programmable controller, an Ethernet switch with 4 x 10/100 Mbps ports, and a Modbus serial communication port. Supporting a wide temperature range from -20 to 70°C, and powered with 24 V c , it also has a realtime clock and a battery for backing up the memory. Processor b 0.25 ms/Kinstructions.
Modicon STB distributed I/O solution Presentation (continued) Momentum 171CBB97030 processor Open and modular system Configuration Single-processor processing system with 3 I/O lines PC Modicon STB I/O Momentum 171CBB97030 RS 232/485 Comm. Port Modicon STB I/O Modicon STB I/O XBTN ATV312 XBTR411 TeSys U The system can include up to 3 Momentum or Modicon STB I/O islands. Single-processor processing system with distributed devices PC Modicon STB I/O Momentum 171CBB97030 RS 232/485 Comm.
Modicon STB distributed I/O solution Presentation (continued) Momentum 171CBB97030 processor Open and modular system Configuration (continued) Multiprocessor decentralized processing system Switch 499NES18100 PC Switch 499NES18100 Momentum 171CBB97030 Modicon STB I/O Momentum I/O Modicon STB I/O Momentum I/O Momentum I/O Modicon STB I/O Momentum I/O Momentum Processor ATV312 TeSys U The system can include an existing M1E processor.
Modicon STB distributed I/O solution Description, references Momentum 171CBB97030 processor Open and modular system Description 1 2 3 4 5 6 7 8 4 RJ45 10/100 Mbps Ethernet ports. 4 Ethernet activity LEDs. 4 100 Mbps speed indicator LEDs. 1 processor running status LED. 1 LAN status LED. 1 24 V power supply status LED. RS232/RS485 Modbus serial link port. 24 V power supply connector.
Combinations Modicon STB distributed I/O solution Combination with Magelis operator dialogue terminals Application A Magelis operator dialogue terminal can be connected directly to a Modicon STB island via the Modbus programming port on the island's standard communication module. 1 2 1 STBNCO2212 (cover open) . and STBXCA4002 cable 3 3 4 2 4 1 PLC. 2 Modicon STB distributed I/O island with STBNpp2p1p standard NIM communication module.
Combinations (continued) Modicon STB distributed I/O solution Combination with Magelis operator dialogue terminals Magelis operator dialogue terminals (1) Type of terminal Magelis range (1) Item 4 (2) Small Panels Cable to be used (terminal/STB island NIM module connection) Item 3 (2) with 3.4" touch screen HMISTO with 3.5" touch screen HMISTU (3) XBTZ9715 (HE13 - RJ45, length 2.5 m) with keypad, screen: 4.34…17.36 mm XBTN with keypad, screen: 4…16 mm XBTRT XBTZ9715 (HE13 - RJ45, length 2.
Presentation, . description Modicon STB distributed I/O solution STB I/O modules and Telefast ABE7 wiring system Presentation (1) Using the Modicon Telefast ABE7 connector or adapter system rationalizes and simplifies electrical enclosure wiring. Far less space is required in the enclosure and the Telefast ABE7 base replaces the connection terminals at the bottom of the enclosure.
Modicon STB distributed I/O solution Combinations,.
Presentation Modicon STB distributed I/O solution Phaseo regulated switch mode power supplies Presentation Two power supply offers are available for Modicon STB distributed I/O islands (1): bb Phaseo regulated switch mode power supplies ABL8RPS/RPM/WPS bb Phaseo regulated switch mode power supplies ABL4RSM/WSR.
Modicon STB distributed I/O solution Description 0 Phaseo regulated switch mode power supplies 1 2 3 4 5 6 7 8 9 Description Phaseo regulated switch mode power supplies ABL8RPS/RPM/WPS The regulated switch mode power supplies Phaseo ABL8RPS/RPM/WPS comprise: 1 Spring clip for 35 mm 5 35 rail 2 4 mm2 cage clamp terminals for connecting the AC voltage (single-phase, phase-to-phase or 3-phase connection) 3 Protective glass flap 4 Clip-on marker label 5 Locking catch for the glass flap (sealab
Modicon STB distributed I/O solution Compatibility Phaseo regulated switch mode power supplies Combinations of Phaseo power supplies with Modicon STB modules Type of Modicon STB module NIM network interface module STBNpp2p1p BOS bus expansion module STBXBE1300K Power distribution module (PDM) STBPDT3100K/3105K (2) Sensors Actuators Auxiliary power supply STBCPS2111K Configuration with (1) 1 power supply ABL8RPS/RPM/WPS or ABL4RSM/WSR (3) 3 A min.
Modicon STB distributed I/O solution References 0 PF106349 Phaseo regulated switch mode power supplies Phaseo regulated switch mode power supplies ABL8RPS/RPM/WPS (1) Input voltage Secondary Output voltage Reset Nominal Nominal power current Conforming Reference to IEC/EN 61000-3-2 Weight kg Single-phase (N-L1) or 2-phase (L1-L2) connection PF513585 ABL8RPS24050 100…120 V a 200...500 V a - 15%,+ 10% 50/60 Hz 100…120 V/ 200...240 V a - 15%,+ 10% 50/60 Hz 24...28.
Compatibility Modicon STB distributed I/O solution Compatibility of I/O with OsiSense XU photo-electric sensors Photo-electric sensors (1) Type Reference General purpose Design Ø 18 Metal Plastic Design Miniature Compact 50 x 50 Compact 92 x 71 Application Material Optical fork handling Packaging Fibre Compact M18, threaded Fibre M18, threaded Compact M18, threaded M8, threaded Miniature Hoisting M18, threaded Compact M18, threaded Compact Fibre Other formats M18, threaded Compatible Not compa
Analog input modules STBAVI 1255K 1270K 1275K 0300K 1400K STBACI 1225K 1230K 0320K 8320K 1400K STBART 0200K Counter module STBEHC 3020K 109
Compatibility (continued) Modicon STB distributed I/O solution Compatibility of I/O with OsiSense XS inductive proximity sensors Inductive proximity sensors (1) Type Reference General purpose Cylindrical, flush mountable, Ø 6.5 plain standard range, short tube M8, M12, M18, M30, threaded Cylindrical, flush mountable, M8, M12, M18, M30, threaded standard range, long tube M12, M18, M30, threaded Cylindrical, flush mountable, Ø 6.
Digital (discrete) input modules Analog input modules STBDAI 5230K 5260K STBAVI 1255K 7220K 1270K 1275K 0300K 1400K STBACI 1225K 1230K 0320K 8320K 1400K STB ART 0200K Counter module STBEHC 3020K 111
Technical appendices Automation product certifications EC regulations Some countries require certain electrical components to undergo certification by law. This certification takes the form of a certificate of conformity to the relevant standards and is issued by the official body in question. Where applicable, certified devices must be labelled accordingly. Use of electrical equipment on board merchant vessels generally implies that it has gained prior approval (i.e.
Technical appendices Automation product certifications EC regulations Merchant navy certifications Shipping classification societies Certified Certification pending BV DNV USA ABS France Norway Germany GL (1) (2) (2) (2) (2) (2) (2) (2) (2) (2) KRS Korea LR RINA Great Britain Italy RRR PRS Russia RMRS Russia Poland (2) (2) (2) (2) CCS China Modicon OTB Modicon STB (2) (2) (2) (2) Modicon Telefast ABE 7 ConneXium Magelis PC/GTW Magelis XBT GT Bridge (2) (2) Magelis
Power consumption document Modicon STB distributed I/O solution Power consumption table Principle Principle The 5 V c voltage required for the logic power supply to the I/O modules is supplied by the following NIM network interface, BOS bus expansion and auxiliary power supply modules from the 24 V c power supply. These modules provide a max. current of 1200 mA at 5 V c (1): bb NIM network interface module placed at the beginning of the primary segment.
Power consumption document (continued) Modicon STB distributed I/O solution Power consumption table Calculation sheet per segment Segment I/O module reference Power distribution modules (PDM) (standard/basic) Number of I/O modules in the segment Power consumption in mA at 5 V c voltage Per I/O module (2) Discrete inputs STBDDI3230K STBDDI3420K STBDDI3425K STBDDI3610K STBDDI3615K STBDDI3725/KS/KC (1) STBDAI5230K STBDAI5260K STBDAI7220K PDT3100K/3105K PDT3100K/3105K PDT3100K/3105K PDT3100K/3105K PDT3
A dedicated services offer for your installed base Presentation Schneider Electric, with its experts, products and dedicated tools, provides services such as system design, consultancy, maintenance contracts, modernisation of facilities or delivering projects.
Presentation (continued) Consultancy services M2C (Maintenance and Modernization Consultancy) A dedicated services offer for your installed base Professional tools and methods, proven experience of managing obsolescence and updating installed bases, to reduce downtimes and improve performance.
Search, visualize, and download Use your tablet or your PC to quickly access detailed and comprehensive information on all our products Tablets Application name: “Automation Library by Schneider Electric” All product ranges displayed by function Dynamic catalogues (hyperlinks, video, ...
Personal computer Path: www.schneider-electric.com > Products and Services > Automation and control > Product offer All product ranges displayed by function Dynamic catalogues (hyperlinks, video, ...
Access product references with adapted tools Path: www.schneider-electric.com > Products and Services > Automation and control > ...
Documents and downloads Visualize and download catalogues, technical publications, certificates, etc.
Compare, select, and compile Path: www.schneider-electric.com > Products and Services > Automation and control > ...
Check the product status, design your equipment Path: www.schneider-electric.com > Support > Product Substitution Tool Path: www.schneider-electric.com > Support > CAD files Product status: indicate whether the product is still commercialized. Otherwise, the tool suggests a product substitution. CAD files: available in various formats they will be easily integrated into your installation design software. Please note that all references to products and services are just examples.
Product reference index Index 1 110XCA2820p 170BNO67100 170MCI00700 170MCI020pp 170MCI02120 170MCI10000 170XTS02000 171CBB97030 174CEV20040 4 490NAD9110p 490NTC000pp 490NTC000ppU 490NTW000pp 490NTW000ppU 499NEH10410 499NES18100 499NMS2510p 499NSS2510p 499NTR10100 9 990NAA263p0 990NAD211p0 990NAD230p0 A ABL1A02 ABL4RSM24ppp ABL4WSR24ppp ABL8BBU24ppp ABL8BPK24App ABL8BUF24400 ABL8FUS0p ABL8PRP24100 ABL8RED24400 ABL8RPM24200 ABL8RPS24pp0 ABL8WPS24p00 ASI20MACC5 ASMBKT085 B BMXXCAUSBH0pp L LAD90 LU9R03 LU9R10
Head Office 35, rue Joseph Monier F-92500 Rueil-Malmaison France The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
Schneider Electric IP 20 distributed inputs/outputs Modicon STB 13
