User manual

Product Description
74
33002479 06 07/2008
Using BOOTP Lite to Assign Address Parameters
Overview
The following information describes how to use the BOOTP Lite utility software.
BOOTP Lite
Utility
Instead of a BOOTP server, Schneider Electric’s BOOTP Lite Server Software utility
can be used to provide the IP address, subnet mask, and default gateway to the
NOE 771 xx module.
Refer to the BOOTP Lite Server Software user documentation for instructions.
UNINTENIONAL OPERATION
Ensure that the MAC address matches the intended IP address in your BOOTP
server. If you do not enter the correct address pairs into the BOOTP server, you
could communicate to the wrong device.
Failure to follow these instructions can result in injury or equipment damage.
CAUTION
Note: BOOTP Lite Server Software and user documentation are available for
download at www.modicon.com.