User manual

Product Description

33002479 06 07/2008 73

Changing

Security Access

Parameters

A system administrator should change the default username (USER) and password

(USER) to restrict future access to the system. After you decide whether you are

changing the HTTP or Write Password security parameters, follow the appropriate

procedure below:

HTTP (Username and Password)

Data Monitor Write (Password)

Security Access

Change

Verification

The following figure shows the message that is generated if you click the Change

HTTP Access or Change Write Password button:

Clicking the Reboot Device button will reset the username and password for the

NOE 771 0x board.

Step Action

1 Type a new username in the New User Name field.

2 Type a new password in the New Password field.

3 Confirm the new password in the Confirm Password field.

4 Click the Change HTTP Access button.

Step Action

1 Type the old password in the Write Password field.

2 Type a new password in the New Password field.

3 Confirm the new password in the Confirm Password field.

4 Click the Change Write Password button.

Note: The Reboot will take about 40 seconds. Larger applications can take up to

one (1) minute.

During the reboot all services provided by the NOE 771 0x are not available.

Ethernet Configuration

Successfully changed HTTP User Name and Password.

Reboot Device

This modification will become effective on the next reboot.