User manual

Product Description
68
33002479 06 07/2008
Establishing the FTP Password
Establishing the
FTP Password
The FTP password is established using the Embedded Web Server. This topic
contains information on how to access the web server for purposes of changing the
FTP and HTTP passwords. The first thing the system administrator should do upon
accessing the web server is change the FTP password. Doing this restricts access
to the web server functionality to the system administrator.
Web server pages and their functionality are discussed in deatil at Embedded Web
Pages (see Embedded Web Pages, p. 265).
Introduction to
Accessing the
Web Server
Each Quantum 140 NOE 771 xx module contains an embedded Web server, which
allows you to access diagnostics and online configurations for the module and its
associated controller (PLC).
The web pages can only be viewed using Internet Explorer 4.0 or higher supporting
JRE 1.4.2_04 or higher.
For information about the additional functionality provided by the FactoryCast
system in the 140 NOE 771 1x modules, see the FactoryCast Manual (31001229).
How to Access
the Web Server
Before you can access the module’s home page, you must enter the full in the
Address or Location box in the browser window. For example: http://hostname
(hostname is the full IP address or DNS host name).
After you do this, the Schneider Electric Web Utility home page displays.
Schneider Web
Utility Home
Page
From the Quantum home page (see Home Page, p. 267) , you can access pages
for:
z changing the FTP password
z changing the HTTP password (see Modify Passwords Page, p. 72)
z diagnostic and configuration information (embedded Web pages (see Embedded
Web Pages, p. 265) provides additional information)