User manual

Product Description
33002479 06 07/2008 39
Submenu: PLC Communications: TCP/IP Ethernet
1)
Parameters can be modified only if no applications have been downloaded
(NO CONF state).
2)
When a new PLC application has been downloaded, the ethernet address on the
screen is only updated after accessing the upper level of the menu structure.
Submenu: PLC Communications: Modbus Plus
Submenu: PLC Communications: Serial Port
TCP/IP Ethernet
Screen Displays
Fields Available Options
Available
Description
TCP/IP Ethernet
IP Address
1,2
###.###.###.### decimal
numbers
displays IP address
TCP/IP Ethernet
Subnet Mask
1,2
###.###.###.### decimal
numbers
displays Subnet Mask
address
TCP/IP Ethernet
IP Gateway
1,2
###.###.###.### decimal
numbers
displays Ethernet IP
Gateway address
TCP/IP Ethernet
MAC Address
##.##.##.##.##.##
(read only)
hexadecimal
numbers
displays MAC (Medium
Access Control) address
Fields Available Options Available Description
##
(modifiable only if the key switch is in the
unlocked position)
1-64 to enter a valid Modbus
Plus address
Modbus Plus State Monitor Link Modbus Plus State
Normal Link
Sole Station
Duplicate address
No Token
Fields Available* Options Available Description
Mode 232 RS mode
485
Protocol ASCII Protocols available
RTU
Adr 1 - 247 Unit address
for Modbus switchover
Primary CPU 1-119
Standby CPU 129 - 247