User manual

Installation and Configuration
33002479 06 07/2008 355
Installation
Introduction The Modicon Quantum Ethernet modules used for the example in this guide may
vary from the ones available at your site. You can substitute the appropriate power
supply, CPU, and Ethernet communication module(s) and other Quantum modules
to make up a rack similar to the one described below.
Assembling the
Rack
Assemble the modules into the rack as follows:
In our example (see below), we use a CPS 114 x0 power supply, a CPU 651 50
processor, and a single NOE 771 01 Ethernet module to makeup our rack.
Step Action
1 Insert the power supply into the leftmost slot (1) on the rack.
2 Add the CPU to the next two slots (2 & 3)on the right of the power supply.
3 Place the remaining Quantum communication modules, beginning with slot 4,
to complete your installation.