User manual
Maintenance
33002479 06 07/2008 335
Downloading a New NOE Exec via FTP
Exec Version Please check the current NOE Exec file version on the NOE Properties Web page.
Follow these links: | Diagnostics | NOE Properties |
Procedure The following procedure describes the steps to use to download a new NOE Exec
via FTP. An example follows the procedure.
Step Action
1 At the DOS prompt, type FTP, followed by the IP Address and press Enter.
2 At the User prompt, type: USER and press Enter.
3 At the password prompt, enter your FTP Password and press Enter.
4 At the FTP prompt, type cd wwwroot/conf/exec and press Enter.
5 At the FTP prompt, type put and press Enter.
Note: Pay attention that the NOE771xx.bin has to be to the local path on your PC
(default path: c:\).
6 At the local file prompt, type NOE771xx.bin and press Enter.
7 At the remote file prompt, type NOE771xx.bin and press Enter.
8 After the transfer is complete you must reboot the NOE to allow the new EXEC to
become operational.
Note: The file name is case-sensitive and must be entered with the name in
uppercase and the extension in lowercase as shown in the figure below.
For example: NOE771xx.bin