User manual

Embedded Web Pages
302
33002479 06 07/2008
Email
Diagnostics
Page
The dialog:
Electronic mail notification service parameters
Component is disabled 4
Incorrect IP 9
Time zone file absent 14
Syntax error in the customrules file 15
Type of Error Value
Parameter Description
Email status Email service is correctly configured (OK).
Link to Server Status Ethernet module is connected to the SMTP server.
Status is checked at start-up and at least every 30 minutes
after start-up:
z Green = module connected to server
z Red = module NOT connected to server
SMTP Server IP Address IP address of the SMTP server
Number of e-mails sent Total number of emails sent successfully
Number of Responses from
SMTP Server
Total number of SMTP messages received from the SMTP
server
Number of Errors Total number of e-mails NOT sent because of an error
Last Errors Reason for the last error with a code in hexadecimal.
0 displays if no error occurs
EMAIL DIAGNOSTIC
Email Status: OK
Link to Server Status: Email Server IP Address:
Number of e-mail sent:
Number of Responses from Email Server:
Number of Errors:
Last Errors:
Last Mail Header Used:
Number of seconds elapsed since last e-mail successfully sent:
Number of times the link to the server has been detected down: