User manual

Embedded Web Pages
296
33002479 06 07/2008
Mail Service
Command
Buttons
Configurable
Mail Service
Parameters
Button Description
Save Saves the new Email configuration.
Note: The previous configuration is no longer valid and it is not stored.
Cancel Cancels the entries in the fields.
The previous configuration is valid.
Disable Email Clears the stored configuration, and disables the email service.
Note: The next time the service is enabled, a new configuration is required.
Parameter Description
IP address of Email Enter a valid IP address. (This parameter identifies the SMTP
server.)
Port Default = 25 (If necessary, you may enter a new value.)
Password Authentication If security is needed, enable Password Authentication by
entrering a check mark in the box.
Enter values for:
z Login:
z Any printable character allowed
z 64 character maximum
z Password:
z Any printable character allowed
z 64 character maximum
3 mail headers Each header must contain
1. sender’s ID in the From: field
z 32 character maximum; no spaces
2. list of recipients in the To: field
z Separate each email address with a comma.
z 128 character maximum
3. fixed part of message in the Subject: field
z (32 character maximum)
The Subject field consists of two parts:
1. Fixed (32 character maximum)
2. Dynamic (206 character maximum)