User manual

Embedded Web Pages
290
33002479 06 07/2008
Configuring the Time Synchronization Service
Configuring the
Time Service
You must use the module’s embedded Web page to configure the time service. No
other method is available.
Time Service
Command
Buttons
Execute the following commands:
192.168.5.100
NTP Server Configuration
IP Address of Primary NTP Server:
Time Zone
Save Cancel
NTP Configuration
Copyright © 2001, Schneider Automation Inc. All rights reserved.
Home Configure NOE NOE Properties NOE Diagnostics Support
0.0.0.0IP Address of Secondary NTP Server:
15Polling Period: sec
Automatically adjust clock for daylight saving change
(GMT-05:00)Eastern Standard Time[New York]
Disable NTP
Button Description
Save Stores new NTP (time service) configuration. Previous configuration is no
longer valid.
Cancel Cancels new NTP (time service) configuration. Previous configuration is
valid.
Disable NTP IP of Primary and Standby set = 0.
NTP server not polled.
Time in controller not updated.