User manual

Embedded Web Pages
288
33002479 06 07/2008
Adding Entries Create new address server configurations with these steps:
When you press the Add the Entry button, a new entry that corresponds to your
input appears in the table in the web frame:
Step Action
1Press Add a New Entry. A dialog appears in the web frame:
Note: The system does not allow you to enter text in both the Role Name and
Device MAC Address text fields. Create either a DHCP configuration (Role Name)
or a BOOTP (Device MAC Address) configuration.
2 For the address server configuration type (DHCP or BOOTP), enter text in the
appropriate field:
z Role Name: variable name for DHCP address server configuration
z Device MAC Address: MAC address for BOOTP address server configuration
3 Enter an address in the Device IP Address field. (We have provided an example
address.)
4 Enter an address in the Subnet Mask field. (We have provided an example
address.)
5 Enter an address in the Gateway field. (We have provided an example address.)
6 Press the Add the Entry button.
Address Server Node Configuration
Role Name:
Device MAC Address:
Device IP Address:
Subnet Mask:
Gateway:
Show Address Server Configuration
Add the Entry Reset the From
Copyright © 1998-2004 Schneider Automation SAS. All Rights reserved.
test_1
192.168.1.1
255.255.255.0
192.168.1.200
Copyright © 1999-2004 Schneider Automation SAS. All Rights reserved.
Role Name MAC Address IP Address Subnet Mask Gateway
Address Server Configuration
Refresh Address Server Database Table
Add a New Entry Change an Entry Delete an Entry
test_1 192.168.1.1 255.255.255.0 192.168.1.200