User manual

Embedded Web Pages
284
33002479 06 07/2008
Global Data (Publish/Subscribe) Utility Configuration
Overview Whether you use either the Configure Each Device Separately or the Copy
Configuration method (see Modeling the System Configuration, p. 195), the
procedure to configure individual parameters is the same. Therefore, in order to use
the Global Data (publish/subscribe) utility in the NOE, you need to configure the
Global Data parameters including:
z Distribution period
z Multicast filtering
z Health bit location
z Global Data base address
z Group IP address
The following sections describe in detail the exact steps to configure each parameter
on the Global Data Configuration page.
Illustration You can change the configuration in the Global Data Configuration page:
Global Data Configuration
Update Global Data Configuration
239
.
Group Address
1000 ms
Multicast filtering
Health Bits
%MW : to
Distribution period
Data Zone
5 scan
Variable Table
Data ID Type Symbol Address Length
1
%M
2
PUB
var_01
var_02
48
%M 60
3 %M
4
NON
var_03
44
%M
5
NON
%M
6
NON
%M
7
NON
%M
8
NON
%M
9
NON
%M
2
2
2
Health Time Out
4
7
0%MW : 5
to
. . .
200 255 255
SUB
SUB