User manual

Embedded Web Pages
282
33002479 06 07/2008
SNMP Page
Fields
The following table describes the SNMP fields that you can modify.
After you make your modifications to any of the above parameters, click Update
SNMP. A new page displays the following message: "Successfully updated SNMP
database." Note that this page contains the same links as those on theConfigure
SNMP page.
SNMP
Community
Strings
Use strings to restrict access to the SNMP Agent. These strings should be set to
Non-Trivial names during module installation.
Field Information To Be Supplied
Manager I IP Address of first SNMP Manager
Manager II IP Address of second SNMP Manager
Location [SysLocation] Location of the module
Contact [SysContact] Name of the responsible systems engineer
Set Designation of user level who can set the configuration
Get Designation of user level who can view the configuration
Trap Designation of user level who can capture information
Authentication Failure Trap
Enabled
Turns on Community Name Checking
Note: You must reset the module in order for the changes to take effect.