User manual

Embedded Web Pages
33002479 06 07/2008 273
Accessing the Web Utility Home Page
Introduction Each Modicon Quantum 10-/100-Megabit Ethernet module contains an embedded
Web server that allows you to access diagnostics and online configurations for the
module and its associated controller (PLC).
Pages on the embedded Web site display the following information:
z Configurable menus of the Address Server both BOOTP and DHCP and for
SNMP (see Configure Address Server Page, p. 287)
z Ethernet statistics for the node (see Embedded Web Pages, p. 265)
z Controller’s configuration (Controller Status on menu) (see Sample Page, p. 277)
z Controller’s register values
z Remote I/O status and configuration (see Remote I/O Status, p. 279)
z Remote I/O register values
z Remote I/O distributed values
The FactoryCast/Real Time modules (see FactoryCast and User Customizable Web
Pages, p. 97) offer these additional pages:
z Configuration and status for Global Data (publish/subscribe) (see Global Data
(Publish/Subscribe) Utility Configuration, p. 284)
z Bandwidth monitoring (see Bandwidth Monitoring, p. 92)
z I/O Scanner status (see I/O Scanning Page, p. 298)
z MODBUS Messaging status (see Modbus Messaging, p. 85)
z NTP configuration and status (see NTP Diagnostics Page, p. 301)
z SMTP configuration and status (see Email Diagnostics Page, p. 302)
The web pages can be viewed using Internet Explorer 4.0 or higher. Either browser
supports JRE 1.4.2_04 or higher.
For information about the additional functionality provided by the FactoryCast
system in the Ethernet modules, see the FactoryCast Manual (31001229).