User manual

SNMP
238
33002479 06 07/2008
Equipment
Profile Subtree
The Equipment_Profiles (7) subtree contains a set of common objects.
Service Indicates . . .
profileProductName(1) the commercial name of the communication product in
a string form (for example, 140 NOE 771 11)
profileVersion(2) the software version of the communication product in
a string form (for example, Vx.y or V1.1)
profileCommunicationServices(3) the communication services supported by the profile
(Port502Messaging, I/O scanning Messaging, Global
Data, Web, and Address Server)
profileGlobalStatus(4) the global status of the communication module:
z 1 - NOK
z 2 - OK
profileConfigMode(5) the IP configuration mode of the communication
module:
z 1 - Local: The IP configuration is created locally
z 2 - dhcpServed: The IP configuration is created by
a remote DHCP server
profileRoleName(6) rthe ole name for the IP address management if it
exists (empty string if there is none)
profileBandwidthMgt(7) the status of Bandwidth Management:
z 1 - disabled
z 2 - enabled
profileBandwidthDistTable(8) the CPU time distribution between Global Data,
Port502 Messaging, I/O scanning
profileLedDisplayTable(9) a table giving the name and the state of each
module’s LEDs
profileSlot(10) the position of the communication module inside the
rack if there is one. If there is no rack, the profileSlot
value will be zero
profileCPUType(11) the host for which that communication module is a
part when a CPU type exists (if there is no host, the
string is empty)
profileTrapTableEntriesMax(12) the maximum numbers of entries in the Trap Table
(equal to the number of possible remote managers)
profileTrapTable(13) a table allowing you to enable or disable the private
traps for each of the communication services
profileSpecificId(14) a unique Profile Specific Identification inside the
equipmentProfile object of the Schneider Transparent
Factory MIB (for example, the PLC Premium family is
100)