User manual

SNMP
230
33002479 06 07/2008
Version &
Community
Identifiers
The version identifies the version number of the SNMP software being used by the
manager and the agent. Your NOE supports Version 1 of the SNMP. The community
is an identifier that you assign to your SNMP network. If community names for the
manager and the agent do not agree, the agent will send an authentication failure
trap message to the manager. If the community names and version number agree,
the SNMP PDU will be processed.
What Can Be
Configured
Your NOE module can be configured to send an authentication trap to two SNMP
managers if it receives a community name in a Get/Set request that does not match
the configured name. Also, you can configure the SysContact and SysLocation via
the configuration page in the module’s embedded web pages. After making changes
in the SNMP Configuration Web page and to set those changes, reboot the module
using hot swap.