User manual

Product Description
22
33002479 06 07/2008
140 CPU 651 x0 Product Overview
General
Description
The Quantum-140 CPU 651 x0 module (see p. 23) is among the newest in a series
of Quantum processor modules. It combines standard PLC functions with the
diagnostic possibilities of a Web server. The 140 CPU 651 x0 communicates using
an RJ-45 connection.
The 140 CPU 651 x0 module is in a double-width standard Quantum housing, which
requires 2 sequential slots in a Quantum rack. Its server functions are diagnostic
only, so use software to configure services.
The table shows the key Ethernet services that are implemented:
Service 140 CPU 651 x0
HTTP Server (see Embedded Web Pages—HTTP Server, Web
Configuration and Diagnostics, p. 95)
x
FTP Server (see FTP Server, p. 94)x
Flash File System (see Flash File System, p. 97)x
BOOTP Client (see Using BOOTP Lite to Assign Address Parameters, p. 74) x
Address Server (see Address Server, p. 82)x
SNMP V2 Agent (Network Management Service) (see SNMP and
Schneider Private MIB Overview, p. 84)
x
Modbus Messaging (see Modbus Messaging, p. 85)x
I/O Scanner (see I/O Scanner, p. 87)x
Hot Standby
Global Data (Publish/Subscribe) (see Global Data, p. 89)x
Bandwidth Monitoring (see Bandwidth Monitoring, p. 92)x
Faulty Device Replacement (Server) (see Address Server Configuration/
Faulty Device Replacement, p. 213)
x
Enhanced Web Diagnosis (see Embedded Web Pages—HTTP Server,
Web Configuration and Diagnostics, p. 95)
x
Schneider Private MIB (see SNMP and Schneider Private MIB Overview, p. 84) x
FactoryCast Application (see FactoryCast and User Customizable Web
Pages, p. 97)
User-programmed Web pages
RJ-45 Connection, see Modbus port in the Quantum Platform manual.x
Fiber Optic Connection
Time Synchronization Service (see Time Synchronization Service, p. 90)
Electronic Mail Notification Service (see Electronic Mail Notification
Service, p. 91)
X