User manual

Address Server Configuration/Faulty Device Replacement
33002479 06 07/2008 219
Configuring Faulty Device Replacement
Configuring the
Address Server
To configure the Address Server you use Web pages generated by the embedded
Web server. The first page that appears is the Address Server Configuration
page. The first column contains buttons used for selecting devices. The Address
Server Configuration page displays configuration information for each device in
the system and has seven columns in the table.
Displayed on this page is information about:
z Role Name
z MAC Address
z IP Address
z Subnet Mask
z Gateway
A additional, unnamed column indicates any difference between the current and
stored configuration. If a difference exists, an exclamation point is displayed.
This is the Address Server Configuration page. All devices are compatible.
On the Address Server Configuration page you can:
z Add a New Entry
z Change an Entry
z Delete an Entry
z Refresh the data table
Address Server Configuration
Role Name MAC Address IP Address Subnet Mask Gateway
myNIP
192.168.3.11 255.255.255.0 192.168.3.11
ENT_1st_floor
192.168.5.14 255.255.0.0 192.168.2.1
Refresh Address Server Database Table
Add a New Entry Change an Entry Delete an Entry