User manual

Transferring Data Using Communication Blocks
160
33002479 06 07/2008
CTE Error Codes for SY/MAX and TCP/IP Ethernet
CTE Error Codes
for SY/MAX and
TCP/IP Ethernet
The following error codes are displayed in the CONTROL[1] register of the control
block, if there is a problem with the Ethernet configuration extension table (CTE) in
your program configuration.
CTE error codes for SY/MAX and TCP/IP Ethernet:
Hex. Error
Code
Description
7001 There is no Ethernet configuration extension.
7002 The CTE is not available for access.
7003 The offset is not valid.
7004 Offset + length are not valid.
7005 Bad data field in the CTE.