User manual

Transferring Data Using Communication Blocks
33002479 06 07/2008 159
ss Hexadecimal
Value in 30ss
Error Code
ss hexadecimal value in 30ss error code:
ss Hexadecimal
Value in 6mss
Error Code
The ss subfield in error code 6mss is as follows:
ss Hex. Value Description
01 Slave does not support requested operation
02 Non-existing slave registers were requested
03 An unauthorized data value was requested
05 Slave has accepted a lengthy program command
06 Function cannot currently be carried out: lengthy command running
07 Slave has rejected lengthy program command
Note: Subfield m in error code 6mss is an Index in the routing information that
shows where an error has been detected (a 0 value indicates the local node, 2
means the second device in the route, etc.).
ss Hex. Value Description
01 No response reception
02 Access to program denied
03 Node out of service and unable to communicate
04 Unusual response received
05 Router-node data path busy
06 Slave out of order
07 Wrong destination address
08 Unauthorized node type in routing path
10 Slave has rejected the command
20 Slave has lost an activated transaction
40 Unexpected master output path received
80 Unexpected response received
F001 Wrong destination node was specified for the MSTR operation