User manual

33002479 06 07/2008 13
About the Book
At a Glance
Document Scope This documentation is for users who want their Quantum PLC to communicate with
devices over an Ethernet network. It assumes that you have some knowledge of
PLC systems and a working knowledge of Modsoft, Concept, ProWORX, or Unity
Pro programming tools. You also need to understand the use of Ethernet networks
and TCP/IP.
This documentation describes the functionality of the Modicon Quantum Ethernet
modules, the NOE 771 xx and 140 NWM 100 00 and the Ethernet port of the
140 CPU 651 x0 modules.
This documentation describes how to install, set up, and use Ethernet-enabled
modules in a Modicon Quantum control system. These modules allow the Quantum
system to communicate with devices over an Ethernet network. Topics addressed
in this manual include:
z the hardware architecture of a Modicon Quantum Ethernet TCP/IP module; this
module is designed to fit into a single slot on the standard Modicon Quantum
backplane
z capabilities and installation of the 140 NOE 771 xx and 140 NWM 100 00
modules in a Modicon Quantum system
z capabilities of the Ethernet port on the 140 CPU 651 x0 CPU modules
Model Number Module Type
140 NOE 771 00 Ethernet Option Adapter
140 NOE 771 01 Ethernet Option Adapter
140 NOE 771 10 FactoryCast Ethernet Option Adapter
140 NOE 771 11 FactoryCast Ethernet Option Adapter
140 NWM 100 00 FactoryCast HMI Option Adapter
140 CPU 651 50 CPU with embedded Ethernet port
140 CPU 651 60 CPU with embedded Ethernet port