User manual

Start Communication with Unity Pro
120
33002479 06 07/2008
Configuring the IP Address of the Ethernet Controller
General
description
The IP configuration tab enables you to configure the IP address settings. The
settings are activated after the connection to the hardware and the configuration is
downloaded to the Modicon Quantum with Unity Ethernet controller, 140 CPU 651
x0.
The diagram shows the IP configuration for the Modicon Quantum with Unity
Ethernet controller, 140 CPU 651 x0.
Description of the selection properties
Selection Description
Configured Activate the IP address, Subnet mask and Gateway address. The
data is activated after the configuration is downloaded to the
controller.
Client / Server The Modicon Quantum with Unity Ethernet controller receives its
IP address parameter through a BOOTP server on startup.
Web configuration The IP address parameter settings are made on the embedded
Web page of the Modicon Quantum with Unity Ethernet controller.
ETHERNET_1
Rack
TCP/IP 10/100 Extended Connection
IP Address Configuration
Configured
From a server
IP Configuration
Model Family Module Address
Module
YES
Module Utilities
Messaging
YES
I/O Scanning
YES
Global Data
0
Module IP Address
IP Address
.
0
.
0
.
0
0
Gateway Address
.
0
.
0
.
00
Subnetwork Mask
.
0
.
0
.
0
Messaging BandwidthI/O Scanning Global Data SNMP
Address Server
Ethernet configuration
Ethernet II 802.3
13
IP address .
12
.
10
.
14
Subnetwork mask
Gateway address
WEB Configurator
YES
SNMP
YES
Address Server
25
.
25
.
0
.
0
13
.
12
.
10
.
1