User manual

Start Communication with Unity Pro
118
33002479 06 07/2008
Selecting the Modicon Quantum with Unity Ethernet Controller
General
description
After configuring Ethernet communication (see Add a New Network to the
Communication folder, p. 104), the Ethernet module parameters can be configured.
When you select the model family, all the corresponding communication-module
configuration options display automatically. The module services allow the following
settings to be made:
The screen shot shows an example of the menu window of the Ethernet module
CPU 651 x0 (TCP/IP 10/100 Extended connection).
Parameter description:
Setting Description
No Setting deactivated
Yes Setting activated. Parameters are set using the Unity Pro menu window.
Note: The availability of the displayed settings varies and depends on the selected
model family.
Parameter Description
Model family Modicon Quantum with Unity Ethernet module settings
Module address Not used
Module utilities For module service configuration options, see above
Module IP address Overview of the IP address parameter set
ETHERNET_1
Rack
TCP/IP 10/100 Extended Connec-
Model Family Module Address
Mod-
YES
Module Utilities
Messaging
YES
I/O Scanning
YES
Global Data
0
Module IP Address
IP Address
.
0
.
0
.
0
0
Gateway Address
.
0
.
0
.
00
Subnetwork Mask
.
0
.
0
.
0
YES
SNMP
YES
Address Server