User manual

Start Communication with Unity Pro
33002479 06 07/2008 115
IP Configuration
General
Description
The IP configuration tab enables you to configure IP address settings for the
Quantum Ethernet module. IP address settings become active after:
z the hardware is connected
z the configuration is downloaded to the PLC in the Quantum Ethernet module
The following figure shows the IP configuration for the Quantum Ethernet model
family:
Description of the selection properties
Selection Description
Configured Activate the IP address, subnet mask, and gateway address. The data
is activated after the configuration is downloaded to the PLC.
Client / Server The Quantum NOE Ethernet module receives its IP address parameter
through a BOOTP server on startup.
Web
configuration
The IP address parameter settings are made on the embedded Web
page of the Quantum NOE Ethernet module.
Ethernet
configuration
Select the default protocol as Ethernet or 802.3.
ETHERNET_1
Rack
TCP/IP 10/100 Regular Connec-
IP Address Configuration
Configured
From a server
IP Confugration
Model Family Module Address
Module
YES
Module Utilities
Messaging
YES
I/O Scanning
YES
Global Data
0
Module IP Address
IP Address
.
0
.
0
.
0
0
Gateway Address
.
0
.
0
.
00
Subnetwork Mask
.
0
.
0
.
0
Messaging BandwidthI/O Sanning Global Data SNMP
Address Server
Ethernet configuration
Ethernet II 802.3
13
IP adress .
12
.
10
.
14
Subnetwork mask
Gateway address
WEB Configurator
YES
SNMP
YES
Address Server
25
.
25
.
0
.
0
13
.
12
.
10
.
1