User manual

Start Communication with Unity Pro
33002479 06 07/2008 113
Selecting the Quantum NOE Ethernet Module
General
Description
After configuring Ethernet communication (see Add a New Network to the
Communication folder, p. 104), the Ethernet module parameters can be configured.
When you select the model family, all the corresponding communication module
configuration options are displayed automatically. The module services allow the
following settings to be made:
The screen shot shows an example of the menu window of the Ethernet module
NOE 771 x1 (TCP/IP 10/100 Regular connection).
Parameter description:
Setting Description
No Setting deactivated
Yes Setting activated. Parameters are set using the Unity Pro menu window.
Web Setting activated. Parameters are set using the configured NOE Web pages.
Unity Pro menu window deactivated.
Note: Not available for every model family.
Note: The availability of the displayed settings depends on the selected model
family and can vary.
Parameter Description
Model family Quantum NOE Ethernet Module settings
Module address Not used
Module utilities For module service configuration options, see above
Module IP address Overview of the IP address parameter set
ETHERNET_1
Rack
TCP/IP 10/100 Regular Connec-
Model Family Module Address
Module
YES
Module Utilities
Messaging
YES
I/O Scanning
YES
Global Data
0
Module IP Address
IP Address
.
0
.
0
.
0
0
Gateway Address
.
0
.
0
.
00
Subnetwork Mask
.
0
.
0
.
0
YES
SNMP
YES
Address Server