Technical information

2/25
Congurations
Modicon STB distributed I/O
solution
Open and modular system
Control system conguration example (1)
NIM network interface modules STBNpp2p1p, located at the beginning of each
island, are gateways for exchanging data between the network or bus master PLC
and the Modicon STB automation island.
Standard NIM network interface modules STBNpp2p1p can be used to congure
and address the installation external devices. These settings are stored in the
module’s internal RAM or Flash memory. Optionally, they can be saved to the 32 KB
removable SIM card STBXMP4440 (except for the address of the network
connection point) to duplicate the conguration from one island to another.
The control system conguration in the above example comprises:
1 Modicon M580/M340/Premium/Quantum automation platform
2 24 V c external power supply
3 HMI terminal with Magelis XBT, XBT G, XBT GT, etc, type Modbus link (1)
4 Network Interface Module (NIM)
5 Power Distribution Module (PDM)
6 I/O modules
7 Second STB segment
8 Another control system
9 Parallel interface module for TeSys U and TeSys Quickt starter-controllers
10 Congurable Preventa XPS MC safety controller connected on the power supply
to the outputs of power distribution module STBPDTp100K
11 ATV 32 variable speed drive
12 Festo solenoid valves
13 Modicon FTB IP 67 I/O
14 Parker solenoid valves
15 TeSys U starter-controller
(1) For further information, please consult our “Modicon STB IP 20 distributed I/O” catalog
available on our website www.schneider-electric.com.
1
8
149 11
6 124
3
2
135
7
6
10
5
15
(1)
2
1
3
4
5
6
7
8
9
10
2
1
3
4
5
6
7
8
9
10
2
1
3
4
5
6
7
8
9
10
2
1
3
4
5
6
7
8
9
10