Technical information

6/6
Technical appendices
Automation product certications
EC regulations
Some countries require certain electrical components to undergo certication by law. This certication takes the form of a certicate of
conformity to the relevant standards and is issued by the ofcial body in question. Where applicable, certied devices must be labelled
accordingly. Use of electrical equipment on board merchant vessels generally implies that it has gained prior approval (i.e. certication) by
certain shipping classication societies.
Abbreviation Certication body Country
CSA Canadian Standards Association Canada
RCM
(formerly C-Tick)
Australian Communications and Media Authority Australia, New Zealand
EAC
(formerly GOST)
Eurasian conformity Russia and customs union
UL Underwriters Laboratories USA
Abbreviation Classication authority Country
IACS International Association of Classication Societies International
ABS American Bureau of Shipping USA
BV Bureau Veritas France
DNV Det Norske Veritas Norway
GL Germanischer Lloyd Germany
LR Lloyd’s Register UK
RINA Registro Italiano Navale Italy
RMRS Russian Maritime Register of Shipping Russia
RRR Russian River Register Russia
CCS China Classication Society China
The tables below provide an overview of the situation as at 9th January 2014 in terms of which certications (listed next to their respective
bodies) have been granted or are pending for our automation products.
Up-to-date information on which certications have been obtained by products bearing the Schneider Electric brand can be viewed on our
website: www.schneider-electric.com
Product certications
Certications
Hazardous
locations (1)
Class I, div 2
Certied
Certication pending
UL CSA RCM EAC
(9)
(6)
TÜV Rheinland
USA Canada Australia Russia USA, Canada
Modicon OTB
Modicon STB FM Zone 2 (2)(5)
Modicon Telefast ABE 7
ConneXium (2)
Magelis
PC/GTW (3) (2) (3) Zone 2/22 (2)
Magelis XBT GT (3) (2) (2) (3) Zone 2/22 (2)(5)
Magelis XBT GK (3) (3)
Magelis XBT N/R/RT CSA Zone 2/22 (2)(5)
Magelis HMI GTO (3) (2) (3) (2)
Magelis HMI STO/STU (3) (2) (2)(3) (2)
Modicon M340 CSA Zone 2/22 (2)(8)
Modicon M580
Modicon X80 I/O CSA Zone 2/22 (2)(8)
Modicon Momentum FM
Modicon Premium (2) CSA
Modicon Quantum (2) CSA, FM (2) Zone 2/22 (2)
Modicon Quantum Safety (2) CSA Zone 2/22 (2) SIL 2, SIL 3 (7)
Preventa XPSMF SIL 3 (7)
Modicon TSX Micro CSA
Phaseo (3)
Twido (4) (4) CSA/UL (4)
(1) Hazardous locations: According to ANSI/ISA 12.12.01, CSA 22.2 No. 213 and FM 3611, certied products are only approved for use in hazardous
locations categorized as Class I, division 2, groups A, B, C and D, or in non-classied locations.
(2) Depends on product; please visit our website: www.schneider-electric.com.
(3) North American certication cULus (Canada and USA).
(4) Except for AS-Interface module TWD NOI 10M3, e only.
(5) For zones not covered by this specication, Schneider Electric offers a solution as part of the CAPP (Collaborative Automation Partner Program). Please consult
our Customer Care Centre.
(6) Refer to the instructions supplied with each ATEX and/or IECEx certied product.
(7) According to IEC 61508. Certied by TÜV Rheinland for integration into a safety function of up to SIL 2 or SIL 3.
(8) Can be used in gassy mines under certain conditions.
(9) Formerly GOST. GOST will be replaced by EAC after certicates are renewed.
2
1
3
4
5
6
7
8
9
10
2
1
3
4
5
6
7
8
9
10