Product data

23
Architectures (continued)
Modicon
™
Quantum
™
Ethernet I/O
automation platform
ConneXium
™
managed switches
Example Hot Standby topologies
ConneXium
™
managed switches (continued)
Predened conguration les (continued)
Example topology with predened conguration les C15, C5 and C6 (1)
Some Hot Standby architectures require the use of two Quantum
™
Ethernet I/O PLCs located several kilometers
apart (up to 15 km with the 140CPU67261 CPU).
In tunnels, for example, the two PLCs can be located one at each end. The switches are connected by a ber
optic link. These switches are connected to the CRP Ethernet head adaptor or CRA Ethernet drop adaptor via a
copper link.
C15
C15
C5
C5
C6
3
3
1
1
2
2
2
2
1
1
1
7
7
7
14
4
5
8
8
8
10
11
9 9
6
Quantum Ethernet I/O
(Standby PLC)
(2)
Quantum Ethernet I/O (Primary PLC) (2)
13
12
(3)
4
Ethernet link, ber optic medium
Hot Standby link, ber optic medium
Ethernet link, copper medium
1312
(3)
5
1
Primary ring, copper/ber optic medium1
Ethernet RIO secondary ring, copper medium only2
Ethernet head adaptor 140CRP31200 installed in the Primary and Standby Quantum PLC racks3
ConneXium switch TCSESM063F2CU1/CS1 with predened conguration le C154
ConneXium switch TCSESM063F2CU1/CS1 with predened conguration le C5 5 (4)
ConneXium switch TCSESM063F2CU1/CS1 with predened conguration le C6 6 (4)
Ethernet drop adaptor 140CRA31200 installed in each Ethernet RIO drop 7 (5)
Ethernet DIO secondary ring, copper medium only8
Modicon9
™
STB Ethernet DIO (6) (7)
Connection to Ethernet DIO device cloud, copper medium only10
Ethernet DIO device cloud 11 (6)
Ethernet communication module 140NOE77112 pp (3)
Ethernet Interlink cable TCSECN3M3M1S4/1S4U (1 m) 13 (3)
Local HMI terminal connected to the Ethernet drop adaptor 140CRA31200 14 (8)
(1) Non-exhaustive example. For additional specications, see our website www.schneider-electric.com.
(2) Requires the Quantum 140CPU67160 or 140CPU67261 CPU.
(3) The Ethernet communication module 12 and Ethernet Interlink cable 13 are only required if there are Ethernet DIO devices in
the architecture.
(4) Also see pages 18 to 22.
(5) Each Ethernet RIO drop can comprise a primary and a secondary rack.
(6) Requires the Ethernet communication module 12 and Ethernet Interlink cable 13.
(7) Please refer to the “Modicon STB IP 20 distributed I/O” catalog.
(8) Please refer to the “Human-Machine Interfaces” catalog.