Product data

22
Architectures (continued)
Modicon
™
Quantum
™
Ethernet I/O
automation platform
ConneXium
™
managed switches
Example topologies
ConneXium
™
managed switches (continued)
Predened conguration les (continued)
Example topology with predened conguration les C6, C2 and C4 (1)
A common use of this preconguration is for interfacing a copper link with a ber optic link on the primary ring and
interfacing a ber optic link with a copper link.
This preconguration of the ConneXium managed switch also enables Ethernet DIO device clouds to be
connected to the secondary ring.
Note: ConneXium switches apply a low priority to exchanges with Ethernet DIO devices, thus allowing deterministic data
exchanges between the PLC and the Ethernet RIO.
C6
C2
C6
C4
3
1
1
1
2
2
2
8 8
2
2
2
8 8
2
2
2
8 8
1
7
7
7
7
7
7
4
55
6
9
9
9
9
9
9
Ethernet link, ber optic medium
Ethernet link, copper medium
1110
Primary ring, copper/ber optic medium1
Ethernet DIO secondary ring, copper medium only2
Ethernet head adaptor 140CRP31200 installed in the Quantum3
™
rack.
ConneXium switch TCSESM083F23F1 with predened conguration le C2 4 (2)
ConneXium switch TCSESM063F2CU1/CS1 with predened conguration le C6 5 (2)
ConneXium switch TCSESM063F2CU1/CS1 with predened conguration le C4 6 (2)
Modicon7
™
STB Ethernet DIO (3) (4)
Connection to Ethernet DIO device cloud, copper medium only8
Ethernet DIO device cloud 9 (3)
Ethernet communication module 140NOE77110 pp
Ethernet Interlink cable TCSECN3M3M1S4/1S4U (1 m)11
(1) Non-exhaustive example. For additional specications, see our website www.schneider-electric.com.
(2) Also see page 18 (C2) or page 20 (C4 and C6).
(3) Requires the Ethernet communication module 10 and Ethernet Interlink cable 11.
(4) Please refer to the “Modicon STB IP 20 distributed I/O” catalog.