Product data

19
Architectures (continued)
Modicon
™
Quantum
™
Ethernet I/O
automation platform
ConneXium
™
managed switches
Example topologies
ConneXium
™
managed switches (continued)
Predened conguration les (continued)
Example topology with predened conguration les C3 and C5 (1)
In some applications, two consecutive Ethernet RIO drops may be located up to 15 km apart. Such distances can
be achieved, depending on the type of ConneXium managed switch, using single mode or multimode optical
bers in the primary ring of the Quantum
™
Ethernet I/O network.
C5
C3
C5
3
1
1
2
2
2
2
2
2
2
2
2
7
7
7
7 7
7
7
1
6
6
6
6
6
6
5
4
5
8
8
8
8
8
8
8
Ethernet link, ber optic medium
Ethernet link, copper medium
109
(2)
Primary ring, copper/ber optic medium1
Ethernet RIO secondary ring, copper medium only2
Ethernet head adaptor 140CRP31200 installed in the Quantum rack3
ConneXium switch TCSESM063F2CU1/CS1 with predened conguration le C34
ConneXium switch TCSESM063F2CU1/CS1 with predened conguration le C5 5 (3)
Ethernet drop adaptor 140CRA31200 installed in each Ethernet RIO drop 6 (4)
Connection to Ethernet DIO device cloud, copper medium only7
Ethernet DIO device cloud 8 (5)
Ethernet communication module 140NOE7719 pp (2)
Ethernet Interlink cable TCS ECN3M3M1S4/1S4U (1 m) 10 (2)
(1) Non-exhaustive example. For additional specications, see our website www.schneider-electric.com.
(2) The Ethernet communication module 9 and Ethernet Interlink cable 10 are only required if there are Ethernet DIO devices
in the architecture.
(3) Also see page 21 (C3) or pages 21 and 23 (C5).
(4) Each Ethernet RIO drop can comprise a primary and a secondary rack.
(5) Requires the Ethernet communication module 9 and Ethernet Interlink cable 10.