Product data

16
Description
Modicon
™
Quantum
™
Ethernet I/O
automation platform
CRP Ethernet head adaptors
CRA Ethernet drop adaptors
CRP Ethernet head adaptors and CRA Ethernet drop adaptors
(1) (2)
Introduction
Ethernet I/O architecture requires the use of the following Ethernet modules:
140CRP31200 Ethernet head adaptor installed in the Quantum b
™
rack
140CRA31200 Ethernet drop adaptor installed in each Ethernet RIO drop b
Each of these modules is connected by an Ethernet cable equipped with RJ45
connectors. The dual RJ45 port on each module simplies daisy chain loop
connections that offer the added advantages of RSTP functionality.
Each module uses one slot in the rack.
These modules are also available in a conformal coating version for harsh
environments with the application of Humiseal 1A33.
Capacity of each Quantum Ethernet I/O architecture
1 Quantum CPU drop that can have one primary rack and one secondary rack b (3)
Maximum of 31 Ethernet DIO drops (each drop can comprise one primary rack b
and one secondary rack) (3) (4)
Distance: b
100 m between each drop
v
2 km between each ConneXium
v
™
managed switch with a multimode ber
optic cable (5)
15 km between each ConneXium managed switch with a single mode ber
v
optic cable (5)
Maximum of 15 ConneXium managed switches b (4)
1 secondary ring level per switch b
Maximum of 128 Ethernet DIO devices b
Description
Display block indicating the module status1
On 140CRA31200 module: rotary switches for addressing Ethernet RIO drops 2
(00 to 159)
Dedicated RJ45 SERVICE port for remote service tools such as a PC with Unity 3
Pro (6) and/or ConneXview
™
or HiVision network diagnostics tools, or with
network analysis tools (Port Mirroring, etc.), HMI terminal, etc.
This port can also be used to connect:
Ethernet DIO such as Modicon -
™
STB I/O (7)
Compatible devices such as Altivar -
™
variable speed drives
RJ45 INTERLINK port on 140CRP31200 module for connecting the 4
Interlink cable
RJ45 DEVICE NETWORK port for connection to the Ethernet network5
RJ45 DEVICE NETWORK port for connection to the Ethernet network6
Removable hinged door7
Ethernet communication module and Ethernet head adaptor combination
Modicon Quantum Ethernet I/O allows for a combined Ethernet RIO and Ethernet
DIO device architecture (see page 14).
This solution simply requires the TCSECN3M3M1S4/1S4U Ethernet Interlink cable
(10) to be connected between the 140NOE771pp Ethernet communication module (8)
(RJ45 port) and the 140CRP31200 Ethernet head adaptor (9) (INTERLINK port 4).
Description
Ethernet communication module 140NOE7718 pp
Ethernet head adaptor 140CRP312009
Ethernet Interlink cable TCS ECN3M3M1S4/1S4U (1 m)10
(1) For additional specications, see our website www.schneider-electric.com.
(2) Requires Unity
™
Pro Extra Large software u V6.0.
(3) Requires two 140XBE10000 rack expansion modules (one in the primary rack and one in the
secondary rack) and a 140XCA7170p extension cable (1, 2 or 3 m) for connecting these two
modules. (see page 25).
(4) Each ConneXium switch counts as two Ethernet RIO drops.
(5) See page 17.
(6) To connect Unity Pro to the Services port 3 the 140NOE771pp Ethernet communication
module (8) and TCSECN3M3M1S4/1S4U Ethernet Interlink cable (10) are required.
(7) Please refer to the “Modicon
™
STB IP 20 distributed I/O” catalog.
1
3
4
5
6
7
140CRP31200
2
140CRA31200
10
8 9
140NOE771 pp/140 CRP 31200