Hardware reference guide

Agency Approvals
874
35013379 02 October 2007
Simulators The following table provides the agency approvals and conformal coating availability
for the Simulators of the indicated Quantum products
Intrinsically Safe
Modules
The following table provides the agency approvals and conformal coating availability
for the intrinsically safe I/O modules of the indicated Quantum products.
Battery Module The following table provides the agency approvals and conformal coating availability
for the Battery module of the indicated Quantum products.
Note: These modules should not be installed in a Class 1, Division 1 environment.
They can monitor/contorl intrinsically ssafe apparatus located in hazardous areas
without the use of additional barriers. See Quantum Intrinsically Safe Analog/Digital,
Input/Output Modules, p. 417 for installation guidelines.
Quantum Part
Numbers
Conformally
Coated
Version
Availabilty
Agency Approval Status
UL 508 CSA 22.2-
142
C-UL Factory Mutual
Class I, Div 2
CE CSA Class I,
Div 2
140XSM002 √√√√
140XSM010 √√√√
Quantum Part
Numbers
Conformally
Coated
Version
Availabilty
Agency Approval Status
UL 508 CSA 22.2-
142
C-UL Factory Mutual
Class I, Div 1
CE CSA Class I,
Div 2
140AII33000 √√√√ √√√
140AII33010 √√√√ √√√
140AIO33000 √√√√ √√√
140DII33000 √√√√ √√√
140DIO33000 √√√√ √√√
Quantum Part
Numbers
Conformally
Coated
Version
Availabilty
Agency Approval Status
UL 508 CSA 22.2-
142
C-UL Factory Mutual
Class I, Div 2
CE CSA Class I,
Div 2
140XCP90000 √√√√√√
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com