Hardware reference guide

CableFast Cabling

852

35013379 02 October 2007

140CFK00400 Quantum CableFast Cabling Block

Overview The K block is used for analog outputs. This interface provides plus, minus, shield,

and power supply interface for both field and loop power configurations.

See Features of the CableFast Cabling System, p. 798 for information on common

specifications and features of CableFast cabling blocks.

Terminal Block The following figure shows the 140CFK00400 terminal block.

Application

Notes

The following are the application notes for the 140CFK00400 module:

1. Configuration – Four analog outputs with a common loop supply. Each point is

allocated four terminals.

2. Compatibility – This terminal block provides four individually unfused

connection point sets for the 140ACO02000 and 140AVO02000 analog output

modules.

CableFast

140 CFK 004 00

UL FILE E123528

SHIELD

This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com