Hardware reference guide

CableFast Cabling
844
35013379 02 October 2007
140CFJ00400 Quantum CableFast Cabling Block
Overview The J block is used for analog outputs, with individual fusing provided per channel.
This interface provides plus, minus, shield, and power supply interfaces for both field
and loop power configurations.
See Features of the CableFast Cabling System, p. 798 for information on common
specifications and features of CableFast cabling blocks.
Terminal Block The following figure shows the 140CFJ00400 terminal block.
Application
Notes
The following are the application notes for the 140CFJ00400 module:
1. Configuration – Four analog outputs with a common loop supply. Each point is
allocated six terminals.
2. Compatibility – This terminal block provides four individually 0.063 A fused
connection point sets for the 140ACO02000 analog output module.
CableFast
TM
140 CFJ 004 00
UL FILE E123528
SHIELD
V4+ V3+ V2+ V1+
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com