Hardware reference guide

CableFast Cabling
35013379 02 October 2007 837
140CFI00800 Quantum CableFast Cabling Block
Overview The I block is used for analog inputs. This interface provides plus, minus, shield, and
power supply interfaces for both field and loop power configurations.
See Features of the CableFast Cabling System, p. 798 for information on common
specifications and features of CableFast cabling blocks.
Application
Notes
The following are the application notes for the 140CFI00800 module:
1. Configuration – Eight analog inputs with a common loop supply. Each point is
allocated four terminals.
2. Compatibility – This terminal block provides eight connection point sets for the
140ACI03000 and 140AVI03000 analog input modules.
Dimensions The following figures show the dimensions for the 140CFI00800 module.
3.0 in
(76.2 mm)
2.3 in
(58.4 mm)
4+ S4V4+ 4-
V3+3-3+ S3 V2+ 2- 2+S2-V1+
5.0 in
(127.0 mm)
V+ RET GND
1- 1+ S1
8+ S8
V7+7-7+ S7 V6+ 6- 6+S6-V5+ 5- 5+ S5
V8+ 8-
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com