Hardware reference guide

CableFast Cabling
820
35013379 02 October 2007
140 CFD 032 00 Quantum CableFast Cabling Block
Overview The CableFast cabling D block is used for sensors requiring either 2- or 3-wire
electrical interfaces. A fuse per group is supplied to accommodate the I/O module
(4) groups.
Terminal block The following figure shows the 140 CFD 032 00 terminal block.
Application
notes
The following are the application notes for the 140 CFD 032 00 module:
1. Configuration – arranged in four groups of eight I/O points. Each input is
allocated three terminals.
2. Compatibility – this terminal block provides 0.8 A group fusing connection points
for 3- and 2-wire proximity switches and is used with the following modules:
140 DAI 353 00, 140 DAI 453 00, 140 DAI 553 00, 140 DDI 353 00, and
140 DDI 853 00.
Dimensions The following shows the dimensions for the 140 CFD 032 00 module.
CableFast
TM
140 CFD 032 00
SHIELD
C D
A B
UL FILE E123528
2 1 8 7 6 5 4 3 10 9 16 15 14 13 12 11 18 17 24 23 22 21 20 19 26 25 32 31 30 29 28 27 VD+VC+ VB+VA+
2+ 1+ 8+ 7+ 6+ 5+ 4+ 3+ 10+ 9+ 16+15+14+ 13+12+11+ 18+17+ 24+23+22+ 21+20+19+ 26+25+ 32+31+30+ 29+28+27+
VD-VC- VB-VA-
8.0 in
(203.2 mm)
2- 1- 8- 7- 6- 5- 4- 3- 10- 9- 16-15-14- 13-12-11- 18-17- 24-23-22- 21-20-19- 26-25- 32-31-30- 29-28-27-
VD-VC- VB-VA-
3.0 in
(76.2 mm)
2.9 in
(73.7 mm)
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com