Hardware reference guide

CableFast Cabling
35013379 02 October 2007 813
Application
notes
The following are the application notes for the 140 CFC 032 00 module:
1. Configuration – arranged in four groups of eight I/O points (two terminals per
point). This block may be used for one- and two-wire inputs or outputs. The input
and output mode is selected via four switches located on the block.
2. Compatibility – this terminal block provides 0.8 A group fusing for the following
discrete modules:
The following table shows the modules provided with 0.8 A group fusing.
Dimensions The following figures show the dimensions for the 140 CFC 032 00 terminal block
block. All four switches must be set to the same position.
Module Mode Switch setting Fuse rating
140 DAI 353 00 Input + 0.8 A
140 DAI 453 00 Input + 0.8 A
140 DAI 553 00 Input + 0.8 A
140 DDI 153 10 Input - 0.8 A
140 DDI 353 00 Input + 0.8 A
140 DDI 853 00 Input + 0.8 A
140 DDO 153 10 Output + 4 A
140 DDO 353 00 Output - 4 A
Note: Select input or output mode with the four switches located on the terminal.
2 1 8 7 6 5 4 3 10 9 16 15 14 13 12 11 18 17 24 23 22 21 20 19 26 25 32 31 30 29 28 27
VD-VC- VB-VA-
8.0 in
(203.2 mm)
2- 1- 8- 7- 6- 5- 4- 3- 10- 9- 16-15-14- 13-12-11- 18-17- 24-23-22- 21-20-19- 26-25- 32-31-30- 29-28-27-
VD-VC- VB-VA-
3.0 in
(76.2 mm)
2.9 in
(73.7 mm)
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com