Hardware reference guide

CableFast Cabling
35013379 02 October 2007 799
Specifications All CableFast systems are designed to the following specifications.
Specifications
Power Ratings 150 Vac/Vdc @ 0.5 A per point
150 Vac/Vdc @ 2.0 A per point *
*Requires the 140CFG01600 Terminal Block and the 140XTS012XX Cable
Dielectric Withstanding
Voltage
1060 Vac and 1500 Vdc
Creepage and Clearance per IEC 1131, UL 508, CSA 22.2 #142-1987
Terminal Block Wire Sizes per
Terminal
One wire - #12 AWG (2.5 mm2)
Two wires - #16 AWG (1.0 mm2) and above (See below for the maximum number
of wires allowed per terminal.)
Note: It is recommended that no more than two wires be used at one time.
Wire Size Number of Wires
#24 4
#22 4
#18 3
#16 2
#14 1
#12 1
Terminal Screw Size M3
Screwdriver Head Size 0.13" (3.3 mm) flat head min.
Terminal Screw Type Captive
Terminal Screw Finish Tin plate (197 μin min.)
Terminal Screw Tightening
Torque
7.2 lb.-in (0.8 Nm)
System Flammability Rating 94 V-2
Temperature
Operating 0 ... 60° C (32 ... 140° F)
Storage -40 ... +65° C (-40 ... +149° F)
Humidity 0 ... 95% RH noncondensing
Altitude 6,666 ft. (2000 m) full operation
Shock +/- 15 g peak, 11 ms, half sine wave
Vibration 10 ... 57 Hz @ 0.075 mm displacement
57 ... 150 Hz @ 1 g, total 10 sweeps
Mounting Configuration DIN rail mount, NS35/7.5 and NS32
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com