Hardware reference guide

Pwr. & Grnding. Guide
796
35013379 02 October 2007
Protective Cover The protective cover must completely enclose the line filter. Approximate
dimensions for the cover are 12.5 cm by 7.5 cm. Wire entry/exit shall be through
strain relief bushings.
Line Filter
Connections
The following figure shows the wiring connections to the enclosed line filter.
Protective Cover
Green/Yellow
(To ground screw on
Quantum backplane)
Ground wire for
metal box (Not
required for plastic box
Brown
Brown
Blue
Case tab
Blue
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com