Hardware reference guide

Pwr. & Grnding. Guide
35013379 02 October 2007 785
The following table provides a list of parts for the 125 Vdc Powered Installation
Figure..
Callout Vendor (or
equivalent)
Part Number Description Instruction
1 Offlex Series
100cy
35005 Line Cord Terminate the shield at the
power supply ground terminal
2 Steward 28 BO686-200 Ferrite Bead Install next to the filter and
secure with tie wraps at Both
ends of the ferrite bead.
Fair Rite 2643665702
European compliance
To maintain CE compliance with the European Directive on EMC (89/336/EEC)
and the Low Voltage Directive (73/23/EEC), the 140CPS51100 and the
140CPS52400 must be installed in accordance with these instructions.
Failure to follow this instruction can result in injury or equipment damage.
CAUTION
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com