Hardware reference guide

Hardware Installation
770
35013379 02 October 2007
Hardware Installation – Mounting Quantum Modules
Overview Quantum modules, with the exception of power supply modules, can be inserted into
any slot of any backplane, and, with the added exception of CPU modules, can be
removed under power (hot swapped) without damaging modules or the backplane;
power supply modules must be installed in the first or last slots of the backplane.
Refer to the following figures and procedure when mounting modules.
POSSIBLE DANGER TO PERSONEL OR EQUIPMENT
An I/O module can only be hot swapped with the field side terminal strip removed.
Failure to follow this instruction can result in injury or equipment damage.
CAUTION
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com